The price and sizes of black steel mesh sheet is mentioned on our website. To make a mesh we need welding equipment to do it ourselves and if not there are pre-made weld mesh in the market as well. The fluctuations in the iron market are the most important factor affecting the price change of welded wire mesh. These fluctuations in the price of iron make it impossible to determine the production price of the mesh. However, the price list can be considered roughly according to the influencing factors. It should be noted that many factors have a direct influence on the price of welded wire mesh, the most important of which is the size of the rebar, the type of rebar, and the size of its spring. In this way, the price of this net increases as the size of the rebar increases and the size of the spring decreases, and vice versa.
General factors affecting the cost of welded wire mesh
- The type of wire coating (hot and cold) in the welded mesh is one of the factors that affect the price of the mesh.
- Another important factor that directly affects the price of the net is the thickness of the welded weft yarn
- The country where the product is produced is one of the most important factors affecting the final price of the product
- Other factors that affect mask prices include product weight
- The customer's order quantity also affects the price of the mesh net
- The fluctuations in the iron market are an important factor affecting the price of mesh
All welded meshes are made from simple ribbed tmt steel bar and are used in various industries such as construction and foundation concrete. It is important that in order to make welded wire mesh, unlike other meshes such as fence mesh, tassel mesh, chicken mesh, or gabion mesh, they are all stranded by wire mesh, which is used to make welded wire mesh, steel bars and they are horizontal and vertical. Placed on top of each other, they are welded to each other, multiplying their strength and resistance. There are two types of welded mesh on the market, hot and cold. The hot version of this lace shows stronger rust resistance. Iron netting is the most widely used type of netting, produced and sold in large quantities for consumption. Meanwhile, the galvanized mesh is often imported from China and injected into the market. The material, thickness, and flexibility of welded wire mesh are one of the factors that influence the purchase. The Internet is one of the most used and useful tools in various industries. Our Welded Wire Mesh and its various types, in both roll and sheet types, in wire and mesh, also known as mesh, is made of iron wire, galvanized wire, and salt. These types of masks are available in different weights, diameters, heights, and materials and are widely used in industry and production.
steel mesh panel size
Mesh panels are all made of steel rebar that these bars come in many different sizes and shapes. Use this product for the manufacture of various types of composite roofs (sheets), walls and prefabricated composite parts, floors for halls, warehouses, highways, and airports, building foundations and concrete foundations, construction of tunnels, subways, and bridges, creation of concrete dams, special water supply channels, warehouses, airports, fences around car parks, construction of concrete reservoirs, etc. In addition, this product is mostly used for the ceiling of floors, swimming pools, etc. The specification is 6, and the mesh plates in No. 8 and No. 10 are also used for floors and fences. Compared to other methods, its economic efficiency is due to material saving, good weight, and short cutting time, on the other hand, the high resistance of these networks is due to the regularity of spot welding and power supply nodes. The mesh is made of black iron and galvanized wire and is available on the market in three forms: panel, ribbed, and steel. The grid consists of steel grids welded together in the form of a table. The grid resistance is higher than the wire. Depending on the type of mesh used in different forms, such as load-bearing walls, roofs, and partitions, the thickness of the wire used to make the mesh varies. The effectiveness of steel wire mesh is used in the chemical industry and food industry, screening of various solids, metallurgy, oil and gas industry, soil classification, metal processing, filter manufacturing, aerospace industry, automobile industry, paint industry, etc. Metal mesh made of simple ribbed steel bars and used for building construction and leveling of foundation concrete, called meshes or welded meshes, is manufactured in our factory in two types of rolls and blades. Sales use. Make this widely used product, unlike other meshes such as fence nets, chicken meshes, and gabion nets, they are made by twisting and weaving existing threads, placing steel bars horizontally and vertically on top of each other. After that, they will cook with each other. This will create a square called a spring. The idea of naming such meshes as welded meshes is rooted in the spot welding of the rebar intersections. As we mentioned earlier, there are two types of welded mesh. The first is a seam-welded wire mesh made of iron wire with a diameter of 2.5 to 5 cm, which is used in various industries. The second type of such mesh is the sheet-welded mesh, or in other words, the sheet-welded mesh, which is produced in 2x1 size using 4 and 6 mm rebar.
welding mesh panels
There are some mesh panels in the market, used in the construction industry, to make this product there are many different ways of welding in the factories. A mesh net is a set of metal strips or wires. This net is made of metal mesh, made of simple ribbed steel bars. The wire mesh is made of iron and galvanized wire, and the product is available on the market in three forms: panel, rib, and steel slab . This product is made of steel mesh that is welded in plate form. The strength of steel grating is higher than that of iron wire. The thickness of the iron wire used to prepare the net depends on the type of use. Different forms of the mesh such as load-bearing walls, ceilings, and squares are also different. Depending on the thickness of the wire used in production, the price of the wire mesh is also different. Mesh is widely used in construction, especially when reinforcing foundation concrete. To make the grid, wires are stacked on top of each other and welded together to form a square grid, which is then assembled by welding. 
Types of mesh lace
Anilox roll The coil net is mostly made of iron wire with a diameter of 2.5 to 5 mm and a length of 1 to 9 meters. leaf net They produce blade or plate-welded mesh in dimensions 1 x 2 meters and 4 and 6 mm reinforcement. Use of mesh The most common application of this product is in the construction industry, where mesh is used to reinforce and improve the tensile strength of floor slab structures and to prevent cracking in concrete. Other uses for grids include:
- for component ceilings
- wall
- floor
- Parking
- swimming pool
- prefabricated structure
- dam
- channelization
- tunnel construction
- road construction
- Airport construction
- Fences and fences
- silo construction
- concrete tank
The main points of implementation of mesh laces
- Any contamination must be removed from the wire before use to prevent concrete from sticking to it.
- Lattice welding and joining must be done carefully and regularly according to the calculated measurements and dimensions.
- Welds must not break or separate, and rebar must not bend during work.
- Rusty wire should not be used as it will lose efficiency.
- The less hot and cold the wires are in the production process, the more resistant the end product is, it strengthens the reinforced concrete.
- For some constructions, the galvanized mesh is used to prevent corrosion and rust in wet environments.
welding mesh sizes
welding mesh has many fans in the steel mesh market, an example of which is widely used in the construction industry, such as simple 6 bars for all available springs and 8 bars for 10*10, 15*15, and 20*20 springs sizes. Basically, when discussing the construction of structures and buildings, the issues of optimizing the use of rebar, fully complying with national building regulations, and increasing the strength of the building are one of the most important principles in the construction of a building or building. structure. In this respect, it is interesting that all these principles are enriched despite the precise and standard intervention of the building. In fact, meshing is considered an operation in buildings that, in addition to optimizing the use of materials, also ensures the safety of the building. Now, with these preparations in mind, we move on to an article on the field of meshing and meshing. In general, a mesh or welded mesh can be admitted to be a type of metal mesh, usually made of simple ribbed steel bars. In fact, the nets are made of black iron and galvanized wire and are marketed in three forms: panel, ribbed, and steel granite slabs . In general, you can say that this product consists of steel grids, which are welded together in the form of a table. The product has a higher electrical resistance than wire, and the thickness of the wire used to make the mesh varies depending on the type of mesh used, such as load-bearing walls, roofs, and partitions. Grid is a widely used material in the construction industry, especially as reinforcing mesh to reinforce foundation concrete. Interestingly, the steel bars are stacked on top of each other to make the iron mesh and welded to form a square spring. On this topic, we must state that this net is completely different from other types of nets such as fence nets, chicken nets, gabion nets, etc., which are woven together by twisted threads. In this regard, you should know that in most common rebar engagement situations, the result will be in the form of a welded mesh. Generally, welded mesh is available in the market in two forms: rolls and sheets or plates. Roll welded mesh is mainly made of iron wire with a diameter of 2.5 cm to 5 cm, while blade or plate welded mesh is 1m by 2m in size with steel bars of 4mm and 6mm in diameter. 
welding mesh price
The factor directly involved in the price of steel slab mesh are the rebar size and welding method. Mesh netting is usually made in sheets or plates in the dimensions of 6 meters by 2.20 meters. The type of material used as taro in this product can be high carbon black wire, galvanized wire or stainless steel. The bars used in the net can be single or ribbed bars in sizes 6, 8, 10 and 12 mm. Interestingly, the springs or holes in the grid in this process are square and have dimensions of 10x10, 15x15, 20x20, 25x25 and 30x30. The mesh is manufactured using cold steel rebar, which makes this product inflexible. It is important to note that mesh production equipment is very precise equipment, as precise distances between rebars and high quality welding are important factors in mesh production. Regarding the types of wires or steel rods used in the utility grid, there are many types of these wires. In general, there are black wires, galvanized wires and steel wires, which will be introduced separately below. We pay:
- Black wire or rebar
The black wire is a so-called baked wire, which retains its chemical properties and forms the raw material of the galvanized wire, so it is used for the production of nets, fence nets, gabion nets, pressure nets, barbed wire, industrial chains, nails, etc. In general, it can be said that a black wire is a thread made from a drawn bar and heated in a high-temperature furnace during the drawing process. So this tension and heat make this wire more pliable and soft. Interestingly, the thread got its name because of the black soot particles on and around the outside of the thread, which is why it is called black thread when the product actually has no coating.
- Galvanized wire or rebar
The galvanizing wire is made by dipping oxide-free steel into a bath of molten zinc to form a cohesive and protective coating of zinc metal. This coating includes a base metal alloy layer that helps resist corrosion of the metal; therefore the process is called galvanization. Of course, it is conceivable that the output wire for such a process is also a steel bar of galvanized stainless steel wire. It is important to note that this type of wire is very resistant to moisture, humidity,, and oxidation, and is available to everyone and quite economically. 
- Steel wire
These threads are called very flexible and soft threads that still have high tensile strength. There are two types of steel wire, woven and non-woven. Wire cloth is actually a product drawn from steel rods with a diameter of 6 mm, which can be stretched to 1.5 mm. Another type is non-woven steel wire made from steel strips. Finally, it should be mentioned that steel wire is cheaper per kilogram than other steels due to its simple manufacturing process.
0
0