The purchase price of ceramic tiles + Sales in trade and export
You have just two options if the ceramic tiles in your bathroom are either cracked, chipped, or outdated. You may either compare painting vs replacing the tiles.
ceramic tiles
Simply remove the old tiles, level the area with a scraper, and then adhere the new tiles to the surface. In contrast, resurfacing a tile includes just glazing it to make it resemble brand new.
If you're tired of the bathroom tiles dictating how your décor should look, change their hue. You might have painted them or purchased new ones.
Consider the cost, the complexity, and the effects of each option while deciding which option is best for you. Choose a method and then go to work, or hire a professional. You will soon be choosing the color of a new towel rather than your lemon-colored floor.
Many persons assume that painting over existing tiles is easier than removing and replacing them. They would also be correct. However, it may not be as straightforward as unscrewing the paint can's top and grabbing a roller with a long handle.
To ensure sufficient primer and paint adhesion, you must grind down the flooring or use an acid-based etching solution to remove the shine from glossier tiles or the sealer from sealed tiles.
Also required are the filling of cracks and replacement of loose tiles with a leveling agent. The replacement of tile flooring is a physically demanding task. After removing the grout, don safety goggles and smash the tiles loose with a hammer. Utilize a crowbar to remove the floor tiles.
Remove any remaining mortar or thinset from the floor. Deal with the bulky mess. Apply a fresh layer of mortar and level each tile prior to installing new grout between the tiles.
A few paint cans are far more affordable than a few hundred square feet of tiles.
You could paint your floor for less than a few hundred dollars as opposed to spending thousands on a room full of new porcelain, even with the primer and acid-based etching agent that is needed to remove the high-gloss shine off some tiles, such as ceramic, so the epoxy coating can attach correctly.
Even while certain floor coatings are durable, they are not as resilient as manufactured tiles. Tile and natural stone that has been sealed are manufactured or prepared to resist the bulk of normal home wear and tear.
When you paint anything yourself, there may be imperfections that make specific areas susceptible to scratches from, instance, a pet's claws or the vacuum. Employ the services of a tub reglazer or flooring expert if you want the best possible paint results.
Even though it is still less expensive than rebuilding the floors, a trustworthy contractor would likely say that new tiles are more cost-effective than even a great coat of paint.
There are several options to consider if only one or two tiles are shattered. You may remove a damaged tile from the floor and transport it to a firm that specializes in custom-made tiles.
Probably, your tiles can be copied, but this service will be considerably more expensive than purchasing a comparable tile from a flooring firm. Use paint to patch any blemishes on the tiles.
ceramic tiles design
The job at hand is less difficult and less costly. However, the touch-up may be noticeable if the sheen and color are not precisely matched.
Instead of painting a few damaged tiles to match the present floor or installing similar tiles, remove some random tiles, broken or not, and replace them with tiles of the same size and substance but in a contrasting color for a whole different look.
Replacement ceramic or porcelain tile increases the value of a house. But purchasing new tile may be expensive.
Tile-setting is also difficult to master; many do-it-yourselfers prefer to employ a specialist. In addition, the removal and disposal of old tile is time-consuming, dirty, and rarely environmentally friendly.
Simply painting the tiles is a faster, cheaper, and much cleaner alternative than replacing all of them. This activity can extend the tile's life and give it a nearly-new appearance.
Basics of Painting Tiles
- Since tile surfaces are not designed to be painted, painting them differs from the majority of other painting projects. To resist practically everything, including dirt, smudges, dust, oil, and even paint, tile surfaces are usually covered with a glossy finish. Nevertheless, with a few techniques, you may paint your tile correctly and extend its life.
- Select the proper surface: Painting tile is most effective on dry or low-moisture vertical surfaces, such as walls or backsplashes. Furthermore, it operates well on flat, low-impact surfaces such as tile countertops. The tile may be difficult to clean since it is a protective surface and has likely gathered years' worth of dirt. Spend some time thoroughly cleaning the tile, giving particular attention to the grout lines.
- Scratch the tile: paint tends to peel off more quickly from glossy surfaces. Sanding the tile surface to generate a matte finish improves and prolongs paint adherence.
- Use only tile paint; do not use acrylic-latex interior or exterior house paints to paint tiles. Use epoxy paint or tile-specific paint for the best results and longest durability.
ceramic tiles price
Varieties of Tile Paint
Aware of the numerous options available, you may choose the tile paint that is suitable for your project.
- One-Part Epoxy Paint: One-part epoxies are straightforward to apply since they do not require many coats. Epoxies requiring only a single coat cure in the air. In contrast, multistage epoxies heal by a chemical reaction. Some one-component epoxies are kept in spray cans.
- Two-Part Epoxy Paint: This product is applied to tiles using a brush or roller after combining two components. There are more possibilities available since two-part epoxies are often easier to get.
- Two-Process Paint: This type of tile paint requires two independent processes. First, a bonding agent is applied. Then, the final finish coat is applied. Two techniques are used to create a durable and robust tile paint.
Instructions
After adding TSP to the bucket, add warm water. While using gloves, wipe the tile to remove as much dirt as possible. Working from the top down, regularly refill the bucket with warm water flavored with TSP. After cleaning the tile with water, allow it to dry naturally.
Trisodium phosphate, sometimes known as TSP, is an odorless dry powder. When mixed with water, it becomes a potent cleanser capable of cutting through oil and grime. TSP is prohibited in several locations. If applicable to your location, search out options devoid of phosphates.
Caulk can be used to repair small chips and gaps in tile. While wearing gloves, apply a little amount of caulk to the crack or chip and smooth it out with your finger. Larger defects can be concealed using external spackle that is watertight.
Apply a little amount to the crack or chip, as you would with caulk. Using the putty knife, bring the filler to the tile's surface by eliminating any surplus.
Since tile painting entails covering the grout, it must be in good condition. Utilize tile grout that comes in tubes for small repairs. Apply the grout with a gloved finger, then remove it. If the damage to the current grout is more serious, remove it and replace it with new grout.
Utilize an orbital hand sander with 100-150 grit sandpaper while wearing hearing, sight, and respiratory protection. Avoid grinding the tile to its core (the section below the glazing). Instead, scuff up the glazing.
Water is used to clean the tile. Once the tile has dry, clean it off again with a tack cloth. If the tack cloth is used with vigor, beeswax will become embedded in the tile's surface, needing extra sanding. Maintain a little pressure.
- Safeguard Non-Paintable Areas
Cover portions that will not be painted using plastic sheeting and painter's tape.
Fill a tray lined with paint using a little amount of primer. Roll the excess primer off the paint roller until it is nearly dry on the tray. Roll the primer onto the roller.
When applying the primer to the tile, avoid applying too much pressure to the roller. To avoid leakage, just apply a thin layer. After the initial coat of primer has dried, apply a second thin layer.
Replace the liner of the paint tray. Before rolling out the roller until it is nearly dry, a little amount of paint is put to the tray reservoir. The tile surface is rolled with a single layer of paint.
Fill the gaps and smooth the edges with a paintbrush. Apply a second coat of paint when the first has dried. If two coats are inadequate, you can apply a third coat once the second has dried.
When the paint is completely dry, apply two coats of polyurethane sealant to protect the color layers.
How useful is this article to you?
Average Score
5
/
Number of votes:
1
