smart bidet toilet seat purchase price + quality test

You can achieve a state of calm and cleanliness with the installation of the cutting-edge smart bidet toilet seat. Your need for toilet paper will be reduced because of the multipurpose cleansing experience provided by the smart seat, which is 381 millimeters broad. This will help you save money over time and have a smaller overall impact on the environment. You have the ability to personalize your experience by adjusting the nozzle position, the temperature of the water and warm air, as well as the temperature of the seat by using the user-friendly control panel. It even comes with an automated deodorization feature so that your bathroom will always smell clean and pleasant. The installation of a bidet, which is an attachment for your toilet, is an elegant and efficient approach to maintaining proper cleanliness while conserving natural resources. If you don't need a licensed plumber to install a bidet toilet, plumbing work still has the potential to be nerve-wracking. In contrast to freestanding alternatives, which require additional plumbing to be installed, the bidet toilet seat is directly connected to the water supply that is already present in the toilet. The process is finished off with a few uncomplicated hose connections and a one-of-a-kind T-valve. The installation of the necessary plumbing is all that is required for the bidet to function correctly. Because of this, the T-valve that connects to the toilet supply line is built into the bidet toilet seat itself. Installing a bidet toilet requires the following tools: Biddy Restrooms: Although the 200 electronic bidi toilets are currently some of the best that can be purchased, these general recommendations apply to virtually every type of bidet toilet. Read the whole thing and pay attention to it. Tools for Removing Mounting Screws: A Phillips-head or flat-head screwdriver may be required in order to remove some of the mounting screws. If you do not have access to a single-bit version, it is recommended that you utilize a multi-bit version that includes a variety of beat heads. Hand Wrench Adjustable Your seat may have plastic fasteners that may be tightened by hand, but if it contains metal screws, we recommend using a hand wrench. When you separate the water hose from the toilet, there is a possibility that a small amount of clean water will drain. As a result, it is recommended that you have a towel and a small bucket nearby. To tidy up, you need only a handful of paper towels or napkins at most. First, take the old toilet seat out of the toilet. When it comes to securing the seat to the rim, two hefty bolts are employed. It is possible that you may need to use a screwdriver with flathead to push up a small plastic cover that is perhaps covering this screw. Once you have gained access to the top of the screw, remove it by unscrewing it with a screwdriver. It's possible that you'll need to reach underneath the toilet in order to remove the toilet retaining nut. Because the mounting screws on some toilet seats are practically an integral part of the seat itself, it is not possible to remove the "top" of these seats. Because there are still two nuts attaching the seat to the rim, removing it and releasing the seat should be possible now that it has been exposed. After the nuts and bolts have been loosened, the seat will be lifted, and then it will be removed immediately. Before you use a new bidet seat, you should give the edge a quick cleaning. Some bidets need the use of an existing toilet, so you shouldn't throw them away just because you have an older model. After that, turn off the water supply to the toilet. Look on the ground behind the toilet that is closest to you to find the valve that controls the water supply. It is necessary to use an oval valve in order to connect the water hose to the water line that is located in the wall at the bottom of the toilet tank. This is the valve that controls the water supply to the toilet. Turn the toilet shutoff valve in a clockwise direction until the water stops flowing. Flushing the toilet will remove any water that may still be present in the tank. Put a T-valve in the supply line that the toilet is currently connected to. On the newly designed bidding seat, there need to be a T-valve. Now that the toilet and the bidet spray are connected, water can flow between the two. Because the majority of the components at this stage should be made of plastic, you should be able to get a snug fit by simply hand-tightening the components. A wrench ought to be utilized in the process of tightening metal fittings that are difficult to do so. Turn off the water supply by turning the valve at the base of the toilet tank. Because there is just a small amount of water left in the tank, you should have a bucket and a towel nearby just in case it leaks. At the very bottom of the toilet tank is where you should link the T-valve to the line that supplies the water. You need to reattach the feed hose to the bottom of the T valve. When installing a bidet toilet on top of an existing toilet, you are going to need a flat plastic mounting plate for the bidet seat. This mounting plate needs to be positioned such that it is behind the rim and centered over the screw holes that are already there. When setting up a bidi unit, the installation process only requires one page to cover the entire device. Insert the mounting screws into the screw holes, and then tighten them using the nuts that are located under the rim. Depending on the bidet seat, these nuts and bolts could be made of metal instead of plastic. In that case, a screwdriver or a wrench will come in handy. Once it is in the correct location, move the bidet seat along the mounting plate in the direction of the rear of the toilet. Establish a connection between the water supply and the bidet seat: Within the bidet seat, itself is a water supply hose that is permanently installed. One end of this hose must be linked to the hole on the opposite side of the T valve. You need to hook the other end of the hose to the side connection that is located on the seat. Check once again to ensure that each of the hose connections is safe and dependable. You are now able to turn on the breaker valve that came before it. To open the shut-off valve for the toilet, turn it in the counter-clockwise direction. This not only refills the water in the tank for the toilet but also provides water for the bidet seat. If it is necessary, inspect the hose connections for leaks and then tighten them. If you have a GFCI outlet, make sure that your electric bidet chair is plugged into it (designed to prevent accidental electrocution and commonly found in bathrooms and kitchens).