The two main varieties of shower trays are the traditional chunky form with a wide lip and the low profile tray, which are frequently approximately 40mm in height or lower.
Because low profile trays have such a sleek and sophisticated appearance, the vast majority of bathroom showrooms and catalogs feature them in their layouts.
The presence of a low profile tray gives the impression that there is more room in the room, in addition to the fact that it is more convenient not to have to make a step up into the shower.
If that's the case, can everyone get a low-profile tray? To put it simply, the answer is both yes and no. Everyone is allowed to have the tray, but only some people will be able to secure it directly to the floor.
Only in situations in which there is access to suitable drainage and in which the drainage runs inbetween floor joists is it possible to install low profile trays. It is NOT a good idea to begin drilling holes in your joists in order to accommodate drainage pipe so that it runs across the joists. This could cause serious structural damage.
Low profile shower tray installation
the installation process of a low profile shower tray is slightly different than a normal model and can be challenging in some cases. Here we have provided a quick five-step instruction for the DIY fans.
Step 1: Inspect the subfloor. Make sure the tray can be supported by the floor it is resting on before you begin. It must be entirely rigid, with no flexibility because this might lead to issues. Replace any floors in this area with marine plywood that is at least 18mm thick and mark the area where the tray will go.
Step 2. Cut the access hatch In order to access the waste, you will need to cut out an access hatch in the floorboards near to the tray. The best instrument for this is a jigsaw since it will let you cut more precisely.
Step 3. Cut a waste hole For your shower tray waste, a hole will also need to be made, so obtain precise measurements and carefully begin making the necessary space. You may then proceed to build the garbage itself once this is finished.
Step 4.: Apply mortar Now things start to get a little messy! Create some mortar by combining 5 parts construction sand with 1 part cement. Spread this mortar in a thin layer over the space underneath the tray.
Before using a spirit level to make sure everything is how it should be, gently press the tray onto the mortar. Once you're satisfied, give the mortar 24 hours to dry.
Step 5.Connect to the output pipe and seal Connect the waste trap and outlet pipe using the hatch you created previously (this can also be used later if you need to do any maintenance) Now you may complete the process by sealing the tray's edges with silicone sealant.
Low profile shower tray problems
Low profile shower trays, even though modern and elegant, are not perfect and a low profile shower tray can face some problems, the most important of which is overflowing. Why do showers with a low profile tend to overflow? What sets them apart from one another? Shower trays with a low profile have a height of just around 40 millimeters. The most important factor in their rise to fame was the sophisticated appearance of their products. In addition, it will give the impression that your bathroom is larger and more sophisticated.
On the other hand, a shower tray with a low profile might provide a number of challenges. To begin, a properly working shower tray should emptier more quickly than it accumulates water. On the other hand, this may be a problem for you if your drainage system isn't very good.
To begin, a shower tray with a low profile has a constrained capacity for the amount of water it can store. Therefore, the drainage needs to be particularly effective in order to prevent the water from pooling.
As a result, there must be a significant amount of drainage space beneath the tray as well as the present joists. Overall, a low-profile tray should have extremely effective drainage. This is a need.
In addition to this, the trap has to have sufficient width. When this condition is met, the shower tray will perform as intended. At this point, we are aware of the issue that is associated with a low-profile shower tray. So, let's have a look at the answer, shall we?
Taking quicker showers is an easy and effective solution to the problem. Not only does this avoid water from spilling over, but it also keeps the wire in the shower from becoming too hot.
Jt fusion shower tray
JT is short for just trays, as the name implies they specialize in shower trays and use the latest tray technology. JT is the number one shower tray manufacturer in the united kingdom that was found in the city of Leeds, West Yorkshire thirty years ago.
JT fusion is one of the JT models that is popular and comes in sizes and shapes and we are going to give you some of those specifications. enlarged range of JT fusion is now available in 47 sizes, and 19 of those sizes come with the option of integrated tiling upstands for the purpose of providing a waterproof enclosure, whether the installation is new or already in place.
This already stunning product may also be purchased with a brand-new concealed waste that gives it an even more contemporary and understated appearance.
The JT FUSION is available for purchase on many websites in case you’re not purchasing from the UK but otherwise why go anywhere else but the JT itself. Here are some of the JT fusion features:
48 sizes are available. comes in square, rectangle, quadrant and offset quadrant Installs flush to the ground or on legs with the JT Fusion Riser Kit.
Legs that are easy to fit, allowing for a speedier installation Contains waste of the JT90mm kindUpstands for tiling can be purchased in 13mm increments.
25-year Guarantee
JT fusion contains the JT anti-slip feature There are nine different color options available for the JT fusion, including distinctive hues of sage green, mistral grey, malbec red, pastel blue, Astro black, Astro white, Astro slate, Astro sand, and matte/gloss white.
JT fusion shower trays are available in many sizes for each shape, ranging from the smallest square model with dimensions of 700x700mm to the largest rectangular models with dimensions of 1800x800mm.
JT fusion shower tray installation
JT fusion shower tray is not difficult to install and the installation process does not differ much from other shower trays. However, there are small details to consider Check out these things before beginning the installation:
Confirm that the measurements of the enclosure are suitable with the shower base Check for any product flaws or damage that may have occurred in transportation.
Accepting the quality of the goods indicates that it fits your needs. unless these specific directions are adhered to, none of the assurances will be honored.
When installing in combination with a steam unit, you need to make sure that the steam outlet is at a height that is at least 300 millimeters from the top of the tray.
Anti-slip trays cannot be used in steam cabins due to compatibility issues You can keep the product in good condition by following a few straightforward steps, such as ensuring that the tray is completely dry after each use to prevent limescale and soap residue from accumulating.
The shower tray should be cleaned often with a sponge or a moist cloth, and then dried with a soft cloth.When necessary, use a non-abrasive cleaning to get rid of stains that are very persistent.
The installation instruction for both flat to floor and raised shoer trays made by JT can be found on their website in an easy-to-access PDF file and by simply googling it you should be able to find it in less than a minute. The instructions are brief but are provided with pictures to add visual assistance, helping you understand the steps more conveniently. As it is mentioned before the guarantee will be canceled if the installation was not performed meticulously, therefore we still recommend you get help from a professional plumber.
JT fusion shower tray reviews
In this section, we are going to go through some of the customer reviews about their JT shower tray. Although Google does not verify these reviews, the search engine does investigate reports of fraudulent reviews and identities and deletes them. Debbie ridgway said “Had a defective shower tray that cracked after 3 years. Spoke with Ryan very efficient , and offered to replace the unit. Great customer service.” And gave a five star,
while PAWEL said I have tried to get spares for the shower waste and contacted Just Trays directly. I was completely ignored. If you decide to buy from them be aware should you need any spares you will likely need to rip out the tray and install a new one.
The drains are Just Trays specific so you won't find any spares to fit to them. Do yourself a favour and go with Matki or another reputable brand, you will save a fortune down the line.
Just Trays are completely unprofessional and after-sales customer service is not existent. Would give 0 stars if possible... UPDATE: After I posted a negative review on here I was finally contacted by Just Trays and my issue was resolved promptly and free of charge.
I just wish I wouldn't have to use this site to get any response. in the end, my problem was addressed but still, I'm left with the impression it most likely would not be if not for the negative feedback. Use at your own peril.”
And gave a 1 star. like every product, JT shower trays had many other positive and negative reviews and unfortunately, a professional review was not provided on any websites (we have not covered it either) but the positive point here is that JT shower trays all come with a twenty five-year guarantee.
P shaped shower tray
The p shaped shower area exists indeed but it is not exactly a shower tray and is rather referred to as p shaped shower bath, after all when you’re having a large p shaped shower in your bathroom it might as well serve as a bathtub too.
Due to its many advantages, the p-shaped shower bath is one sort of bathtub that can be fantastic. Many individuals are unsure about which to choose between a bathtub and a shower due to the growing popularity of showers over bathtubs.
The majority of people struggle with a lack of room and are unable to fit both facilities. Although they are both excellent, they have different advantages.
The p shaped was a technique to help folks choose between a bath and a shower, given our past talk. It combines two functions The following is a list of important characteristics that are shared by all p-shaped bathtubs:
Take up Less Room: The first advantage of a shower bath is that it can help you make better use of the space in your bathroom. It is feasible to include the shower and other bathroom amenities into a single unit.
There is no requirement for additional or distinct space for any of them. Despite their size, small bathrooms typically have a limited amount of available space. In a circumstance like this, it might be a good choice to do so.
Need less money: The cheaper expenses involved, both in terms of the unit and the installation, are another compelling argument in favor of installation.
Because the shower and bathtub are combined into one unit, you will save the money that you would have otherwise spent on the shower and bathtub individually.
0
0