Gilsonite is a natural form of asphalt and a type of hard hydrocarbon tar. And they are manufactured by countries like USA, Turkey, Colombia, Iran, etc. and supply the world. Limestone powder produced from high calcium non-dolomite limestone mainly exported from UAE, Vietnam, Japan, Oman, Malaysia and used for coating, chemical varnish production, rubber manufacturing, etc. The main markets are petroleum and printing ink industry. In petroleum, it is used as a fluid loss control and shale stabilizer for oil-based drilling fluids (OBM) and water-based drilling fluids (WBM). 
It is also used as a loss recycling material and a slurry density reducer for cement fluids. Due to its high softening point and high molecular weight distribution, when added to drilling fluid, it acts as a fluid loss control agent and rock stabilizer by smelting or partial deformation. This semi-soft material then blocks the finer fractures in the formation and smears within the wellbore to make a tight, hard filter paste. As the drilling fluid circulates continuously, some products are dissolved in the fluid imparting the fluid with coating and rheological properties. Limestone is a source of lime (calcium oxide), which is used in steelmaking, mining, paper production, water treatment and purification, and plastic production. Lime also has important applications in the glass industry and agriculture. 
Limestone powder
Limestone powder is a kind of mineral powder obtained by crushing calcium carbonate stones with the molecular formula CaCO3. High-calcium lime or dolomite lime, which contains calcium and magnesium carbonate, can be used to produce limestone powder according to the needs of consumers. Also, other types of stone dust, such as marble and granite dust, have similar uses and properties. Limestone soils are white in appearance and should not contain coarse particles of stone and sand. The less inclusions and purity of calcium in the crushed calcium carbonate rock, the better the quality of the rock. To produce limestone powder, sets of stone crushers and crushing jaws are used along with sieves of desired sizes. Limestone powder produced from non-dolomite, high-calcium limestone produced in stone crushing plant is known as mill powder, which is the main component of putty and is used in paint, chemical varnish production, rubber manufacturing, sculpture, and patina. The most common use of stone dust in construction is as a building material and is used to produce mortar or to strengthen concrete and cement. The use of limestone powder in the production of cement blocks, bricks, and concrete, in addition to reducing production costs, increases its strength, and prevents cracks and cracks. Precipitated calcium carbonate is known as precipitated calcium carbonate and abbreviated as PCC, pure, refined, or synthetic calcium carbonate. The sedimentary type of calcium carbonate is the same as other types of calcium carbonate, such as limestone, marble, and plaster, in the form of CaCO3. Industrial calcium carbonate is a non-toxic material and is directly used as a food and medicine additive. 
Limestone powder supply
One of the most important factors affecting the supply of limestone powder is the distance from the place of production to the desired destination. The longer this distance, the higher the price will be due to the increase in transportation costs. Our collection site can be a very convenient information base for these loved ones. You can contact our consultants for information on supplies and prices. Different manufacturers produce this product with different quality and send it to the consumer market, so this problem also has a great impact on the final supply. But in general, it can be said that the most important factor in limestone powder is the amount of calcium used in it. Naturally, the higher the quantity of this substance, the higher the final price and the lower the supply. In recent years, our site has been able to serve the people and various industries by offering bulk products, so we suggest that if you intend to buy this mineral, contact us and get the stone powder you need. Limestone powder applications/uses Limestone powder is used for various purposes. Here are some of its applications:
- It is used in agriculture to neutralize acidity, increase nutrients, increase organic matter, and improve soil biota.
- It is also used to prevent explosions in coal mines.
- It is used in industries and power plants to remove sulfur from pollutants produced in chimneys.
- Limestone dust is poured over it after the asphalt to reduce the pores and cracks of the asphalt.
The oil and petrochemical industry are another consumer of limestone soils, as they are used in the formation of drilling mud. This material has two applications in the livestock and poultry industry. Firstly, to disinfect the breeding room and stable, and secondly, as a dietary supplement to provide calcium. Construction is one of the major consumers of limestone soils. This product is used in mortar production, sandblasting, cement production, etc. The resulting solution of lime, called lime water, is used to purify water and purify water. Limestone powder is one of the most important materials used in steelmaking. Limestone is used in various iron smelting furnaces. Limestone is commonly used in construction because it is found in most building materials such as cement, plaster, concrete, and mortar. Most mortars used in masonry are those that combine water, cement, and sand with lime. Limestone destroys hard water due to the presence of magnesium and is also used to purify water. 
Gilsonite asphalt powder
Gilsonite bitumen powder is a natural form of bitumen and a type of hard hydrocarbon bitumen. This product is a multi-property natural hydrocarbon resin used in asphalt, even in inks and printing inks and is used in more than 160 products from drilling cements to chemicals, foundry sand additives and a wide range of chemicals in various forms. Natural gelsonite is often compared to natural bitumen compared to heavy oil bitumen, also known as bitumen, unit, and bitumen. For the use of gilsonite in asphalt, the amount of ash in it does not matter. The presence of ash in gelsonite is not a disturbing factor, it is used to improve asphalt by mixing it with other additives. Some experiments show that the presence of sulfur compounds in gelsonite during pouring asphalt concrete makes the asphalt more durable, so the presence of sulfur in gelsonite is an important and good factor for mixing it with asphalt. As a result, it is very suitable for mixing with gilsonite asphalt. A special and effective feature of gelsonite is that the designed road is less sensitive to high temperatures and deformation. Gelsonite can be used directly in a hot mixing unit without additional equipment. Other benefits of gelsonite include road strengthening that lasts longer than conventional methods which can last 10 years. Gilsonite produces stronger asphalt with better adhesion and durability that can last up to 25 years. Gelsonite asphalt has a high resistance to lag. Gilsonite increases the viscosity of asphalt and ultimately makes roads more resistant to deformation and even fatigue at elevated temperatures, unlike other curing materials or high-quality RAP-based asphalt. 
Gilsonite asphalt powder supply
Gelsonite or bitumen is a kind of natural hydrocarbon that is refined and made into powder made by countries like USA, Turkey, Colombia, Iran, etc. and present it to the world. This product can be used in drilling, oil and gas materials, ink and paint industry, asphalt and paint. This very useful material has various specifications and is produced in many grades, mesh sizes and ash contents and can be used in many industries such as road construction and maintenance, ink, paint and many other products and trays. Gilsonite or asphalt dust is one of the most valuable materials and its main use in road construction as an additive for hot mixing of asphalt. When added to hot-mix asphalt, it results in higher pavement strength and stability. For example, asphalt dust is one of the main components of Japan. The beautiful dark color of the produced asphalt dust can help to have a smoother finished look. In general, bitumen dust is used to obtain a beautiful finish in Japan. Crushed bitumen is similar to soot, has a dark brown color and is used for polishing metal or wood. It is also applied as a decorative coating and can avoid rusting over time. If you intend to get a more durable, long-lasting coating, it is common practice to mix bitumen with boiled linseed oil and turpentine and then apply it to the product. 
Gilsonite Asphalt Applications
Gelsonite film application is diverse because it has a wide molecular weight distribution, a high molecular weight, and a high softening point compared to other types of polymers, allowing it to soften or deform as it approaches its softening point rather than completely dissolving in a low viscosity liquid. Even when it is 20 degrees above the softening point, it remains a highly viscous liquid. Gelsonite mixtures, solvents, and other paint-like additives are used to coat and seal asphalt pavements such as driveways and parking lots. Gilsonite is also used as an adhesive and sealing agent in the manufacture of roofing felt. The addition of gelsonite makes some paint and wood stain combinations more durable. 
Gilsonite products are now widely used in water-based, oil-based, and synthetic slurry systems worldwide. Mixed gelsonite has proven to be highly effective in all water-based systems. Gelsonite is used for drilling mud fluids and cementing oil wells. From the original source of solid natural oil, Gelsonite Application consists of the backbone of a polymer with a high functional nitrogen content, giving it excellent adhesion and bonding properties. It is a natural mineral ore that is allowed to be exempted from registration under the European REACH regulations.