If you want to know how to make black old fashion shoes made from leather new look+ others color such as brown here is some explanation:
- Treat the leather with leather conditioner
To begin, I would devote some of my time to cleaning those scuffed-up old shoes. Before using the conditioner, you want to make sure there is no trace of any debris or filth on them. o do this, immerse the items in warm water while protecting your hands with rubber gloves. Make sure the leather doesn't get wet at any point! After you have finished cleaning them, take off the rubber gloves and condition the leather with a little bit of the product. Before proceeding on to step 2, make sure the shoes have had the time to dry thoroughly.
- Make use of tannic acid
Spread tannin generously throughout the whole of the shoe's surface. If you are using a spray bottle, spread the solution evenly all over the shoes, making sure that every region of the shoe is completely covered.
- Buff Shoes
After the tannin has been allowed to dry, buff the surface with a microfiber cloth at a slow pace, and then allow it to dry. Continue using this approach until the leather has an even and smooth texture.
- Shoe Polish Made of Wax
With the leather polished and ready to go, wax polish it down. Apply the wax polish all over the shoe using a gentle brush, being sure to cover it evenly. Wait until the shoes have had time to dry out before putting them back on.
- beeswax sealant
Using seal wax on your shoes helps to preserve them from further wear and tear. To evenly coat the shoes with seal wax, you may apply it using a foam applicator brush.
- Drive Them to Exhaustion
If you're a lover of retro fashion, you may want to think about wearing them out at night while you're going out and about. Just keep in mind that you shouldn't wander about barefoot if you reside in an area that has a tropical environment. 
old black leather shoes
shoes made of leather in black which is old + history of old shoes from vans: Van's shoes are equipped with a lace-up closure for a snug and secure fit. Iconic Vans side stripe Durable suede or canvas upper Padded collar for enhanced comfort a detail of contrasting stitching Embroidered logo on the inside of the heel Traction and grip are provided by the traditional waffle outsole seen on Vans shoes. The Old Skool was first released in 1977, making it far more seasoned and experienced than any of its current wearers. This shoe was the first to have the now-iconic side stripe, which has become so well known in the skate business for its relationship to quality and durability. The side stripe has become so well known in the skate industry because of its link to quality and durability. On the other hand, it is known for its unique patterns, partnerships, and comfortable fit on the streets. There is no way to make a mistake when purchasing a pair of old skools since they meet every need for a decent pair of shoes.... Unless you're like wearing heels, that is. Because the Vans original waffle sole provides such a high level of traction, these shoes are very well-liked in the action sports community. 
Around the collar, they are stuffed to the brim with cushioning to guarantee that they are comfortable from the very first use. One must always have a timeless pair of Vans Old Skool shoes in their collection. EARLY 1970'S SKATEBOARDERS WHO LIKE VANS' RUGGED MAKE-UP AND STICKY SOLE ARE SEEN SPORTING VANS ALL OVER SOUTHERN CALIFORNIA. 1976 Tony Alva and Stacy Peralta are responsible for the creation of the Vans #95, which later evolved into the Era and included a cushioned collar and a variety of color combinations. The Vans #95 went on to become the shoe of choice for a whole generation of skateboarders. FIRST APPEARANCE OF THE "OFF THE WALL" LOGO USED BY VANS 1977 The Vans #36, often known as the Old Skool, was the first model to have the now-iconic Vans side stripe. The Old Skool was the first skate shoe produced by Vans to have leather panels with the purpose of increasing the shoe's longevity. What began as a casual sketch by Paul Van Doren and was at first referred to as the "jazz stripe" has evolved into the recognizable identifier of the Vans brand. The Vans #98 is also released, and with the support of skateboarders and BMX riders, the Vans Classic Slip-Ons become all the rage in Southern California. These shoes would go on to become the original Slip-On silhouette, and they will be regarded as an icon for many years to come. 1978 The Sk8-Hi was first released in 1978 under the name "Style 38," and it was the first model to include the now-iconic Sidestripe on an inventive new shape. The Sk8-Hi advanced the functioning of skates to the next level, which is above the ankle, which is the area where skateboarders put the greatest strain on their lower extremities. Not only did the Sk8-Hi prevent bones from being hit by skateboards that were launched at them, but it also gave the park an a new appearance. 
1982 The movie Fast Times at Ridgemont High gave the world its first glimpse of Vans' most recognizable design. Because of a surfer and his kicks, California's young culture expanded all over the world, and with it, the Classic Slip-On shoe. Overnight, the pattern of alternating black and white squares that is immediately identifiable emerged as a symbol. 1984 Vans has filed for protection under Chapter 11 of the bankruptcy code. Vans is not able to get out of debt despite the fact that their signature shoes, the Vans, are selling rather well. This is because the firm sells such a broad variety of items, which has depleted the company's resources. The courts give their approval to the reorganization plan at the same time that Paul Van Doren is reinstated as President of the company. Paul informs all of the employees that they may not receive a raise for the next three years and that they will need to make cuts in everything but the quality of Vans shoes. 1988 The first signature skate shoe, the Vans Steve Caballero, was made available to the public. The Half Cab quickly rose to prominence as one of the most recognizable and culturally important shoes in the annals of skateboarding's long and illustrious history. 1995 The Warped Tour will make its debut on the main stage for the very first time thanks to Vans. 
how to make brown leather shoes look new
Make leather shoes in brown new again but how to make them look new. During the summer before last, Mr. V's leather shoes were put through rigorous testing, including severe rain dancing, one-foot bunny hopping in muddy fields, and jaywalking in the largest typhoon ever recorded. They were beyond their prime. They have taken on a washed-out appearance as if they had seen Chuckey’s episodes innumerable times over and over again. They were probably aware that they came dangerously close to losing everything. It was just a matter of time until it happened. Naturally, Mr. V has a soft place for the two of them together. It's likely that he'll keep wearing them till they rot away on him. Therefore, in order to lessen the unpleasant appearance that this pair projects whenever its owner is around, I wanted to revitalize these worn-out leather shoes. I have the ability to spit on them. I could take the paint from a child who is just four years old and start browning the leather shoes. They may be deep-fried in my oven. Thankfully, just as I was ready to go on to step number two, I jogged my memory and realized that olive oil can be used to polish wood furniture. I was able to persuade myself that everything that is beneficial for wood must also be beneficial for leather in some way. I performed a quick search on the internet. I was correct. Olive oil worked well as a polish for leather shoes. Olive oil and lemon juice are two ingredients that, when combined, produce an excellent polish. I don't know about you, but I went for the word "awesome." What about you? I blended one part lemon juice to one part olive oil. I found an old cloth, soaked it in the solution, and then put a coating of it to a shoe that had previously been brushed clean. Leather-Shoe-Polish After I had covered one shoe, it appeared in this manner. Following the application of the polish, the shoe seemed to be a much deeper color than it really was. 
After allowing it to soak in the polish for a couple of hours, it took on a color that was closer to its natural state. Observe the striking contrast between the situation before and after the polish was applied. Leather-Shoe-PolishLeather-Shoe-PolishLeather-Shoe-PolishLeather-Shoe-Polish As you can see in the image below, there were still certain areas of the simple slide on shoe that did not have any color on them. So, I went ahead and put still another coat. After the polish had dried and I was pleased with how it looked, I took an old dry towel and buffed it a little bit to give it some shine. This was done to make the polish seem more shiny. Before Mr. V wore them again the next day, I let them sit out overnight. Take a good look at them. Great looking shoes indeed. In addition to avoiding the potentially harmful chemicals included in store-bought shoe polish, I saved money by making it myself. Leather-Shoe-Polish Polishes one pair of shoes in size 11 (or 44), depending on your preference. things you must have: 2 tablespoons of olive oil 2 tbs lemon juice directions: Make sure there is no dirt or debris on the shoes. To clean them, you may make use of a brush or a moist towel. Mix olive oil and lemon juice. A layer should be applied to the shoes using a cloth that has been dipped in the mixture. Allow the polish to soak up and dry (roughly an hour or two). 
Step 3 should be repeated if you feel that any of the shoe's components still have a pale or worn appearance. Use the dry areas of the cloth to buff the shoes until they are shiny.
0
0