اتصال به اینترنت شما ضعیف یا قطع است.

hot briquetted iron price per ton

Sponge iron formed in a dense form is called briquettes, and in terms of the manufacturing process, it exists in two forms: hot briquettes and cold briquettes. The price per ton is usually calculated for this product and Sponge iron balls are widely used in many steel-making units in the world. Briquetting technology is widely used in the steel industry, some examples of its applications are coal briquette, coke briquetting, and sponge iron briquette. That is, the compressed sponge iron blocks or iron scraps are called briquettes, which are separated from the direct regeneration unit to the steelmaking unit during the transportation process and then mixed with the size additives such as lime and silicate glue in the briquetting ring. machine, and converted into briquettes. It is very impressive and useful in briquetting of sponge iron due to its high efficiency and easy storage and transportation. hot briquetted iron per ton

  • cold briquette

During this process, the material entering the briquetting machine is at ambient temperature. In the process of cold briquetting, the types of materials entering the briquetting machine are different, so the cold briquetting process itself is divided into two categories: cold iron, coal briquette and soft iron briquette. Advantages of sponge iron furnace cold press ball:

  1. Scrap metal such as pellets can be recycled
  2. it does not require granulation
  3. The carbon content of the product can vary from 0.02% to 1%
  4. Its density is higher than 5.4 grams per cubic centimeter
  5. Metal quality over 96%
  6. Easy to transport and store
  7. The product quality is uniform
  • hot briquette

hot briquetted iron price During hot briquetting, the feed temperature of the briquetting machine exceeds 650 degrees Celsius. This method is easy to transport and the safety of iron sponge is high, so heat press balls are more known and used more. The advantages of this method make it superior to previous methods, among which its high resistance to high-density oxidation and good mechanical strength can be mentioned. iron price

hot briquetted iron per ton

Hot iron sponge briquette is a product made from sponge iron at one time, the only difference from sponge iron is that the sample is shaped and prepared into a large dense block stored in bulk and per ton. Hot briquettes are obtained from hot sponge iron at 650 degrees Celsius. The best hot sponge iron ball is priced based on its quality and size. This price is calculated and determined by the manufacturer after production and before delivery to the market. Sponge iron is obtained directly from the reduction of iron ore, they operate on it without the need to smelt iron ore, in which oxygen is removed, the iron ore quality is 67%, and when reduced there are product particles such as porosity and briquettes, you can check prices from reliable online sales sites. The production of hot sponge iron balls with low carbon content is done with the most modern and advanced industrial machines, in general, all production stages of this product are carried out by machines. The production steps of this product are very sensitive and must be carried out in accordance with principles and standards. The first and one of the most important steps in the production of this product is to supply high-quality raw materials. First, the raw material of the sponge iron is prepared and poured into a special furnace at a very high temperature to be melted, and the next step is to pour the molten material into a briquetting machine, where the briquette is formed in size and shape. iron per ton Various tests are carried out and finally, the obtained hardened briquettes are checked for quality and after registration, the briquettes are brought to the market by the supplier. Today, iron balls are mass-produced to meet consumer needs. The production and manufacturing stage of sponge iron ball is such that after being melted and regenerated in steel making, it comes in different forms in the casting process, it is used in three forms: porous, ingot, and rebar.

hot briquetted iron price

Sponge iron briquettes come in two forms: cold pressed and hot pressed, which we will explain here. To produce this type of gram, the temperature must reach over 650 degrees Celsius, and the products produced in this direction are specially developed products. You can find the price on our website. Generally, briquettes are made by compressing and compacting materials such as coal dust or corroded iron and soil and creating a dense shape, pellets are another example of such products which are softened into iron ore. There are many ways to easily buy iron sponges with complete confidence. The best way to buy this product is direct purchase where you can go directly to the manufacturer to buy and use high-quality products at an incredible price. Another best way to buy hot sponge iron balls is to refer to this website so that you can compare samples in terms of quality and avoid paying high travel costs and traffic. And pay the amount and the item will be delivered to the door. Hot and cold iron balls can be purchased in person online. To reduce prices and costs, they can be purchased directly without an intermediary. pellets and briquettes have to go through several steps, they go through the final production and baking process, and finally they dry and cool for easy transport. They are round and spherical in appearance, and because of their porous structure they resemble mushrooms, so they are called mushrooms, and they have a high iron quality. It is worth mentioning that 5% of the world's steel is made from sponge iron. The briquette has a hot and cold type, and the characteristics of a hot briquette are easy to transport, low specific surface, high density and mechanical strength, good oxidation resistance, electricity and reduce coke consumption, improve the quality of metal load in blasting due to carbon and impurities extremely low, is the coolant and the furnace for the production of alloy steel. These materials are added to the blast furnace agglomeration raw material, and after being ground by the regeneration method, they are added to the pelletizing raw material. The performance of the granulate is its mechanical strength The granulation methods are divided into two categories: cone granulation and disk granulation, which are used according to the type of use and industrial application.

iron price

The price of buying and selling iron on the market fluctuates under the influence of supply and demand, and of course the exchange rate. The price for buying and selling iron cannot of course appear in all iron products. Some products may decrease in price and some may increase in price. In fact, the price fluctuations of all iron products are not the same. It can be assumed that with changes in raw material and pig iron prices, iron prices will fall or rise accordingly. This case is one of the cases that has the biggest impact on hardcore buying and selling prices. But it is not the only parameter. The supply and demand of a product is another matter. For this reason, we may see a decrease in the buying and selling price of iron for one steel product and an increase in the price of another steel product. Trade and sale of used beams in sizes 14, 16, and 18 is high due to their widespread use in construction. The important thing is, of course, that in most cases the beams are cut and offered in sizes of 3 to 6 meters, depending on the foundation of the building. To save costs, sales of used logs are booming as they expand into building sheds and more. When selling used logs, buyers consider various factors. The buyer must inspect this item to determine if the product is suitable for reuse in other structures or buildings. The specifications considered are: The amount of corrosion and rust in the beam due to its first use. If the rust of the iron beam is high, then the resistance of the iron beam to possible incoming forces will be low. Therefore, the product will not be able to be reused in new structures such as sheds. Degree of welding: Welding of iron is definitely used to connect the beams to each other. This issue is also taken into account when determining the quality of logs when selling used logs. The degree of bending and twisting of the beam Length of beams: It is often obvious to cut beams to the dimensions of the building. So in most cases, we come across beams shorter than 6m and 12m when selling used beams. Buyers should be aware of these things when buying used beams to determine if the product is suitable for his type of use. If you do not have enough information, contact your supervising engineer.

iron per ton

These irons are sold again without being used inside the structure per ton. The A16 rebar is brand new, but the beams and plates are slightly rusted due to moisture and rain. The length of the beam is 12 meters. The use of second-class iron is common in the construction of sheds. If you are going to buy a used beam, actually a used iron, check the quality of the iron before you buy and buy it according to your construction needs. Beams class II 20 Second class 20 and 16 beams also belong to the factory production line, they are not welded or rusted, they are of course also painted. The size is 3-6 meters and about 15-20 tons. Due to the high quality of the load and the availability of all connections and bolts, this product still has the same ability to connect and set up as the previous structure. We put a picture of the structure below. The structure size is 3*4*3 and 3*4*6 meters. As mentioned above, the price of used beams can vary. The crux of the problem is obvious. The quality of the goods is very qualified. For example, we currently have second-grade 16 and 20 spokes that are laser cut and painted. The product is not soldered. Since the columns are not used inside the structure, they have no arches. These tiles are great for building sheds and reusing them in structures. Briquette is a compressed combination of a steel industry product or compressed fuel. Buying briquettes depends directly on sponge iron or iron powder. Since the price of the briquette depends on the price of sponge iron or other products in the steel industry, it has been the focus of the steel industry. High-quality briquettes are actually sponged iron produced in compact form. One of the important parameters for producing high-quality briquettes is the temperature of the sponge iron that enters the briquettes. The price of briquettes also depends on the type of briquettes. According to this important parameter, briquetting is divided into two categories: cold briquetting and hot briquetting. In cold briquetting, the temperature of the added sponge iron is very low. In this process, soft sponge iron balls are produced. In addition, cold sponge iron balls are also a product of this process. In high-temperature briquetting, temperatures above 600°C are used. The price of briquettes and the purchase of high-quality briquettes depends on factors such as whether the briquettes are hot or cold. At Gram Trade, you can communicate with our experienced advisors in various ways before purchasing. Get the best and most suitable prices for minerals and carbon materials from our colleagues' recommendations. Buyers of high-quality briquettes should thoroughly research the market and understand price trends for the US dollar and industry costs. Briquettes can be purchased from standard and professional manufacturers in the domestic industry. To buy briquettes, it is necessary to compare the prices of reputable manufacturers. The quality of the briquettes produced by each manufacturer is also different. When buying high-quality briquettes, in addition to knowing the top producers, you should also know about foreign markets. You can contact our team of experts to get the best prices.

How useful is this article to you?

Average Score 5 / Number of votes: 2

Comments (41 Comments)

Harry Collins

Hot Briquetted Iron (HBI) is a high-quality, cost-effective form of iron ore that can be used in a wide range of applications.

0

0

Charlie Anderson

HBI briquettes are highly consistent in size and shape and have a higher heat value than other forms of iron ore.

0

0

Sina

Briquette iron, which is one of the very high quality irons, has different prices

0

0

Hani

Do you give a discount for large purchases from your company and website?

0

0

Saba

Bricket's songs are one of the very high quality and good songs that were difficult to produce

0

0

Flora

The price of each ton of hot iron briquettes varies according to the supply and demand in the market.

0

0

ayda

Hello, don't be tired, I say good luck to all those involved in Arad Branding Group

0

0

Maryam

The price of each ton of iron briquettes that you explained was very good and I learned a lot from these explanations

0

0

Safari

briquet sponge iron to be shipped to Daresalam port, Tanzania. metric ton iron prices have soared since the start of the war Using natural gas

0

0

zohreh

Iron used in industries and other fields is obtained from the heart of mineral stones.

0

0

Ali vafadar

HBI is a modern charge material for use in combination with scrap or as an alternative to scrap in steelmaking furnaces or as an addition to blast furnaces in ironmaking applications.

0

0

Kafi

Briquette iron is great for many projects, selling it in bulk can be a great help for construction and other works

0

0

Mona hajimirzakhani

Hot iron sponge briquette is a product made from sponge iron at one time, the only difference from sponge iron is that the sample is shaped and prepared into a large dense block stored in bulk and per ton.

0

0

Shahryar

Iron is an excellent and versatile material for construction, which is strong and hard and easily formed and worked

0

0

Raheleh Moradi

The price of hot sponge iron briquettes (hbi) is higher due to the secondary process performed on sponge iron.

0

0

shadi Doosti

Sponge iron is a porous product. Porous balls in the dimensions of 9-25 mm, because of the high percentage of porosity in it, the possibility of oxidation process is high in it.

0

0

sarina tavakoli

In fact, the most important problem that arises in the transportation and storage of sponge iron for the consumer factory is the possibility of oxidation of this product, if it is exposed to moisture and heat, there is also a possibility of ignition.

0

0

Shahryar

Most importantly, the price of iron is cheap and it is preferred compared to other options

0

0

Nazi Jari

The oxidized sponge iron product has a very low efficiency in melting, which cannot even be used in induction furnaces, especially small induction furnaces.

0

0

samira Rabbani

The production of iron briquettes has been carried out precisely with the aim of correcting the disadvantages of the sponge iron product, i.e. the possibility of its oxidation and ignition.

0

0

Dorna

Because sponge iron briquettes do not have the problem of oxidation and ignition, they can be transported without any packaging and in bulk just like iron ore with bulk ships. Therefore, it does not have side costs such as packaging, and of course the finished transportation costs will be much less.

0

0

Bahar

This high-quality and excellent iron is sold by the ton and has a high price due to its good quality

0

0

Behnaz

Hot sponge iron briquette is one of the products obtained in the production process of sponge iron and is used as one of the most important materials in the steel making process

0

0

Khadijeh

Hello, iron ore is extracted from it to make steel and iron, and there are many interesting products that have many uses in industry and construction

0

0

AmirMahdi

Irons are used in some factories and they make urinals and their prices are very high

0

0

Ali

Iron is one of the important tools for construction and plays a major role in the strength of the structure

0

0

Shahryar

The oxide produced from iron is brittle and soft and does not provide any protection to the base metal and eventually rusts.

0

0

sajad

Iron briquette is one of the widely used products in the industry, which will sell well in the world market.

0

0

Kafi

There are different types of stones and it is also great for building and other works. Selling it in bulk can help in building

0

0

samira

Hello and don't be tired, one of the most important metals that exist, iron is one of the most important metals used in all industries.

0

0

Milad

The information you have given us about these briquettes has been very interesting and interesting, thank you

0

0

Kafi

Ki ore is one of the materials that is used in many works, selling it in bulk can help a lot

0

0

roya

Hello the production of iron briquettes has been carried out precisely with the aim of correcting the disadvantages of the sponge iron product, i.e. the possibility of its oxidation and ignition.

0

0

Hello, don't worry, the sponge iron that forms densely is called briquette, yes exactly, thank you for the information and practical product.

0

0

Mohsen

These irons are of very high quality and their prices are good. Filled irons are used

0

0

Salh nzad

Iron is one of the best known, best, most widely used and strongest types of metals that are used in various industries.

0

0

Kimia davodi

Explain to me on WhatsApp how to export this product to other countries and how much profit it brings to the merchant

0

0

Kimia davodi

Explain to me on WhatsApp how to buy, sell, trade and export this product

0

0

Darya

How interesting it was, I really had no information, it was very useful

0

0

hosein

Hello, good time. This article was very useful for me. Thank you for your good site

0

0

hosein

Hello, good time. This article was very useful for me. Thank you for your good site..

0

0

💰 Tenfold your income 💎