there are different types of adhesive to lay the porcelain tile. One of the commonly used types is the ready mixed one. Tile can add color, texture, beauty, and value to your home, and while it may seem like the job of a professional, it doesn't have to be. Many home improvement stores near you even offer guided classes through online virtual instruction, with just a few steps, few materials, and low cost, most tiling projects can be done on your own. With so numerous adhesives accessible for your home advancement project, choosing the proper adhesive for your project can appear overwhelming. There are many factors to consider when choosing the perfect tile glue or adhesive for your job, and we've scoured multiple sources to give you a list of tile glues by material to make your tile project a success. Your tile job will look better and last longer if installed properly, using an adhesive or tile glue that is suitable for the specific surface. The two main types of tile adhesives or adhesives are pre-mixed pastes and powdered tile adhesives or adhesives, but within these two main types of tile adhesives or adhesives, there are some other sub-types used for certain items or when certain factors exist. 
For smaller projects, especially those using smaller size tiles, a premix paste is sufficient, but when using larger size tiles (12" x 12" or larger), powdered tile adhesive should be used. There are many factors that can influence the decision on the best tile adhesive or adhesive for your project, we'll discuss all the different types of tile adhesive or adhesive, so read on.
- Thin mortar
Thinset mortar is the most widely used adhesive for bonding tiles to cement, cement boards, or backing boards. Made of sand, cement, and sometimes water-retaining agents such as latex or polymers, thin-set bonds stone tiles to surfaces and is resistant to moisture, mildew, and heat. Thinset mortars are available in standard forms, premixed, unmodified, or modified, with drying times between 24 - 72 hours, depending on the specific type of Thinset mortar you are using.
- Standard thin mortar
Standard thin mortar is a powder that must be mixed with water to activate. Standard thin mortars are available in a variety of colors and have stronger overall adhesion than ready-mix mortars. While it takes a little time and works to mix with water, a standard thin mortar will bond any type of tile: porcelain, ceramic or natural stone. Standard Thin Mortar should always be used on any tile larger than 11" x 11", when laying any type of floor, for larger wall tiling projects or complex pattern jobs. Available in white and grey, your grout color choice should determine the color thin mortar you use for your tile project. A feature of standard thin mortar is its flexibility, which makes it ideal for high-traffic areas or when adding under-floor heating elements (in which case a self-leveling thin mortar should be used to prevent having to smooth out small heating elements) cable). Thin profiles of types S1 and S2 refer to the flexibility of the adhesive, with S2 being the more flexible adhesive and can be used in areas of high vibration and motion. 
- premix
As a simple alternative to standard thin mortars, thin mortars are also available in the premixed form in a variety of colors. Premixed thin mortar is ready to use for small jobs such as backsplashes and small tiles around fireplaces. Smaller tiles can be applied using a premixed thin mortar, but a standard thin mortar should be used for larger tiles and more intricate jobs.
- Modified
Modified thin mortars contain latex or polymeric agents, which are basically a rubber added to the mix to keep the cement mix or mortar hydrated for longer, resulting in stronger thinner thin layer applications of adhesion. The longer cement binders are exposed to moisture or hydration, the stronger they become, which causes the crystals that form in the cement to grow longer and form a stronger binder.
- unmodified
Unmodified thin mortar is an old fashioned mix of sand, cement, and water, the more cement in the cement to sand ratio the better the bond. Water-retaining agents such as polymers or latex are sometimes added to unmodified thin and thick mortars to increase cement hydration for the optimum bond.
- glass brick mortar
Due to its transparent, non-porous surface, glass tiles require special mortars or sheets. Glass tile mortars are made from polymeric binders and are ideal for mosaic tiles and other glass or light stone tile applications. Designed for glass, marble and stone mosaic tiles, glass tile mortars are available in a variety of shades to match the grout you will be using for your project. To securely hold the glass tiles to the wall and prevent the tiles from slipping or sagging, a non-sag formula should be used.
- Tile adhesive
Composed of the acrylic copolymer and calcium carbonate, tile adhesive is an alternative tile adhesive that dries faster, approximately 24 hours. Tile mastic, more commonly referred to as tile adhesive these days, is not suitable for high humidity areas but can make vertical projects easier due to its sticky consistency, providing grip where tiles can slip. Tile mortar is best for bonding porcelain, glass, or tile, but unlike thin mortar, it should not be used to fill gaps due to its watery consistency and is best for tiles 8 inches or smaller. 
- Epoxy mortar
Comprised of two or three separate ingredients that the user must mix together immediately before application, epoxy mortar is another waterproof tile adhesive option that sets in just a few hours. Epoxy mortar is more expensive than other adhesives and can bond just about anything, including porcelain, ceramic, glass, stone, and even metal. The epoxy mortar needs a certain temperature range, around 60-90 degrees to set properly, around 45 minutes to start, and not much time to use this adhesive. Epoxy mortar cannot match the durability of traffic, movement, and compression. When used as a sealer, Weldbond is mixed with water at a ratio of 1:5. When applied to porous surfaces, Welbond seals the surface and prepares the tile for installation. To mix Weldbond as an all-purpose adhesive to bond tile to your surface, use a 1:1:4 or 5 ratios of Weldbond, water, and mastic (such as plaster, grout, mortar, or a cement/cement mixture). sand). The tiles are now ready to be bonded to the surface and the curing time is 2-3 days. Known for its gorilla-like strength, Gorilla Glue is a water-activated polyurethane adhesive. Since Gorilla Glue scales up to 3-4 times the application size, some sources do not recommend Gorilla Glue for tiles. Extensions can push tiles further than surrounding tiles, or even push them apart altogether. Other sources indicate that Gorilla Glue can be used as a tile adhesive for small tile repairs if you wait for the expansion to occur before placing the tile on the bonded surface, which usually occurs about 20 minutes after installation. 'Application. Once this time has elapsed and the glue has swollen, lower the tile and press it to the desired height. The recommended cure time for Gorilla Glue is 24 hours before grouting. The real question is not how well the tile adhesive sticks to the paint, but how well the paint sticks to the surface. It is best to remove the paint from the surface before tiling. The paint is not strong enough to support the weight of the tiles and grout. Some types of paint are also incompatible with the alkalinity of tile adhesive and will begin to dissolve. Water-based paints can absorb moisture from the adhesive and become soft and flexible. 
A tiling project can be a fairly simple project that can have a huge impact on the overall look of your home. While choosing the right tile adhesive for your job might seem like a daunting task, we hope this list of tile adhesive types helps make your decision-making process easier and more streamlined.