for choosing the right cable to buy, we continuously mentioned that considering a specific application can determine the prices and available suppliers. The corrugated and welded type cable, as an example, is designed to be used in harsh conditions to withstand the possible physical and chemical dangers. Different types of cables are designed for a specific application so in the following context more information about the armored cables will be given. The Galvanized Interlocked Armor (GIA), Aluminum Interlocked Armor (AIA), and TECK90 Cable Systems provide electrical engineers and specifiers with a cable system that has built-in environmental protection for all types of electrical circuits. The armored cable can be utilized in applications involving instrumentation, control, communication, or power distribution. They are utilized whenever there is a requirement for mechanical protection. UL 1569 specifies the requirements for metal-clad (MC) armored cables, which can be constructed using any of the following methods:
- 600 V
- 2000 V
- 4 kV to 35 kV Medium Voltage (MV)
Cables made of composite materials, including members made of optical fiber (OF) In North America, armored cable products such as AIA, GIA, TECK90, and CCW constructions each offer their own unique benefits and deliver maximum performance and ease of installation for a wide variety of commercial, industrial, and utility applications. These constructions are available in a variety of different types of armor. An alternative to the traditional, labor-intensive ways of installing cable in conduit is provided by these all-in-one cable assemblies, which are distinguished by their distinctive qualities. Continuously corrugated welded (CCW) aluminum sheath constructions have outstanding crush, heat, moisture, and chemical resistance to satisfy the needs of difficult industrial circumstances. Additionally, these constructions are appropriate for installation in Class I, Div. 1 hazardous areas. By custom, MV armored cables are produced with three different jackets that are each identified by a different color. Yellow jackets are used for 5 kV cables whereas black jackets are used for 600 volt cables. In the United States, cables rated at 15 kV are colored red. In Canada, 15 kV cables are orange. Constructions Using CCW (MC-HL) In the production of CCW armor, an aluminum strip is first formed into a circular throughout its length, and then the strip is welded together at the seam. This smooth tube is then rolled or crimped to generate ridges in order to prevent kinking when it is bent. This is done in order to prevent kinking. 
This sort of MC armor creates an impenetrable barrier against liquids and other substances, including moisture. CCW is an ideal alternative for applications requiring a variable-frequency drive (VFD) motor drive since the armor provides electromagnetic benefits in these situations. The National Electrical Code (NEC) recognizes MC-HL cable, also known as Metal Clad Hazardous Areas cable, as being appropriate for installation in Class I, Div. 1 hazardous locations in voltage levels ranging from 600 V to 35 kV. It is possible to have a building of a similar kind but with 300 V by selecting the type ITC-HL option. Constructions made with either Aluminum Interlocked Armor (AIA) or Galvanized Steel Interlocked Armor (GIA). In a conventional AIA or GIA construction, a strip of metallic material is wound in a spiral around the cable core, and each turn of the spiral is interlocked with the turn that came before it. In order to assure optimal performance over the lifetime of the cable, AIA and GIA control and power cables often include a flame-retardant, sunlight- and moisture-resistant PVC, CPE, or LSZH jacket over the armor. AIA is comparable to TECK90, with the exception that its underarm protection often does not contain an inner jacket. These cable assemblies can either be installed openly or covertly, depending on the environment, whether it be damp or dry, indoors or outside. Instrumentation, control, communication, and power distribution are all examples of possible applications at voltages ranging from 300 V to 35 kV. AIA products are more flexible than CCW but provide less protection in damp or corrosive situations. AIA and GIA products are suitable for installation in Class I, Div. 2 hazardous locations because they meet the requirements of UL 1569. 
However, because they do not meet the more stringent requirements of UL 2225, these products are not suitable for installation in Class I, Div. 1 hazardous locations. UL 1569 and UL 2225 are both standards developed by Underwriters Laboratories (UL). TECK90 Buildings and Constructions When used as wiring in hazardous locations in Canada, TECK90 armored power and control cable is factory-built and tested for use as per the guidelines of the Canadian Electrical Code when used with certified HL cable glands. This is done in accordance with the requirements of the Canadian Electrical Code. The National Electrical Code (NEC) does not accept TECK90 constructions for use in MC-HL locations in the United States. However, this product is recognized as a cost-effective alternative to installation in conduits in both the United States and Canada, and it is used extensively in the pulp and paper industries all over North America. This product is used extensively in the pulp and paper industries all over North America. The requirements of mining, chemical, petroleum, and other types of hostile environments are taken into consideration when designing TECK90 products. They can be put in dry, damp, or wet environments as visible wiring or wiring that is disguised from view. The construction of a TECK90 cable consists of an inner PVC jacket, an aluminum interlock armor, and an overall PVC jacket. 
Continuously Corrugated and Welded type Cable is also known as the CCW cable. CCW (Continuously Corrugated Welded Cable), umbilical, and subsea cables are being added to a suite of products that are used by the oil, gas, and petrochemical industries for power, control, instrumentation, and communications. As a result, the company is expanding its product portfolio on a global scale. The reintroduction of the CCW product line expands the current OGP product offering. This provides both existing and new customers with a single source for all of their wire and cable requirements. At the same time, this enables General Cable to participate more broadly in the downstream portion of the OGP market. This segment includes facilities such as refineries, petrochemical plants, and LNG (liquid natural gas) facilities. CCW products are used in hazardous locations (in accordance with NEC® Articles 500-505), which require cables that are impervious to gas, liquids, and vapors and that are terminated with explosion-proof glands to electrical equipment. These hazardous locations use CCW products because they meet these requirements. The refining industry has standardized CCW as the only acceptable product construction (reference API RF14F and 14FZ), and it is a staple in offshore production platforms, refineries, LNG facilities, and petrochemical processing mills. This is because CCW meets the standards set by the refining industry. The United States of America, Indonesia, Mexico, the Caribbean, South America, and the Middle East are some of the most prominent "oil patches" in the globe, and the CCW product range is ideally suited for use in these regions. 
The stocking profile of General Cable covers a complete line of products ranging from 300 volt instrumentation to 35 kV power cable. This will allow the company to offer a comprehensive product selection to serve the needs of the industrial and OGP markets. We offer a wide variety of wire and cable with the policy of pricing our products reasonably lower than the global market prices. You can easily contact us and rest assured that you will have a price reasonably lower than the market. So, fill out the inquiry form, let us know what you require and we will contact you momentarily.