The black dragon gilsonite paint is an asphalt enamel that dries quickly and has a high shine. For use in the painting of metal, stone, and wood surfaces, both indoors and outdoors, wherever a protective coating that is resistant to corrosion in black is sought.PHAL All kinds of metal surfaces, including pipes, are protected against corrosion to a high degree by this substance. It is a paint that dries quickly, requires only one coat for coverage, has an indefinite shelf life, and is completely devoid of chromates and lead. This asphalt paint offers the highest possible level of corrosion protection, in addition to providing permanent waterproofing and rustproofing.
The black dragon asphalt paint provides full coverage in a single layer and is resistant to water, acids, alkalis, electrolysis, and other natural and man-made factors. For use in the painting of metal, stone, and wood surfaces, both indoors and outdoors, wherever a protective coating that is resistant to corrosion in black is sought. In addition to being good for acid and corrosion prevention, it is also ideal for use in wastewater immersion and is allowed for use in wastewater wells, pump stations, and manholes. Maintains stability throughout a pH range of 3-10. It's ideal for utilizing in:
- Underground Pipelines
- Valves and water lines
- Bolts and Flanges Made of Steel
- Natural Gas Piping Made of Metal
- Grease traps and storage tanks
- Pipe made of concrete and concrete
- Manhole Covers Made of Iron
- Steel in Waste Treatment Plants
- Walkways and Traveling Trusses
- Steel to be incorporated into concrete
- The undercarriage of automobiles and trucks
- Wooden Posts and Structures
However, there are many other brands that produce gilsonite asphalt powder and gilsonite paints but the important factor in determining the quality of the product is the Gilsonite used in the paint. So, manufacturers must pay attention to buying the best quality of Gilsonite available in the market.
gilsonite asphalt paint
The best water and weather-resistant coating can be achieved by using a paint that contains a Gilsonite or asphalt coat and the gas-proofed Tung or Oiticica oil (or mixtures of the two) oil rather than any other drying oil. It has been discovered that while this mixture is industrially usable, it is difficult to brush, and it is preferred to add a drying oil to reduce viscosity. This can be done without the addition of any other drying oil. It has been discovered that perilla oil is especially effective for this particular purpose. Alternate drying oils such as linseed, soya bean, sunflower seed, or sardine oil can be utilized in place of the perilla oil if desired. Perilla oil, on the other hand, has drying characteristics that are significantly superior to those of the other oils indicated. When american gilsonite paint is fluxed with raw Tung or Oiticica oil, it produces an unstable liquid. An unstable liquid is one that will age to the point where it has an excessive amount of body, and it is also one that is not gas-proof. When the Gilsonite coat is fluxed with Tung or Oiticica oils that have been heat-treated in a conventional manner with the additions of gums or resins, the resulting paint becomes full of check marks and degrades quickly, particularly when it is exposed to the elements. The utilization of the existing variety of oils, on the other hand, results in a paint that does not acquire an excessive amount of body with aging and, at the same time, does not check and decay swiftly upon being subjected to the environment. It is possible to modify the drying period of the completed paint by adding dryers such as lead, cobalt, manganese oxide, or other similar substances. To get the proper consistency in the paint, thinning oils such as mineral spirits, solvent naphtha, or any other good solvent for the Gilsonite paint and the oils may be added. In most cases, this calls for somewhere between fifty and sixty-five percent by weight of thinning oils.
Black dragon asphalt paint
As mentioned one of the best manufacturers of asphalt paint is the Black dragon, but there are also other manufacturers of paint coatings, but the function always is the same. Although the lower limit of 10 percent for the Gilsonite coat pigment is lower than what is often used, it is still possible to create a good and durable paint. By combining a small amount of carbon black, say 3 to 5 percent by weight, with this small quantity of gilsonite powder msds pigment. The amount of tung or oiticica oil can also vary, but the greater the percentage, the more durable the resulting coating. Between 25 and 50 percent tung or oiticica oil, or a combination of the two, is optimal. However, the advantages of mixing these gas-resistant oils with Gilsonite covering pigment are obtained across the entire concentration range of Gilsonite recommended. Typically, the discrepancy between the above percentages is made up of a viscosity-reducing oil like perilla. In the absence of this oil, tung or oiticica oil may be utilized to complete the paint base. Pigments such as iron oxide or chrome green can be utilized to create paints with appealing hues and exceptional durability. A paint made according to this invention is not only more resistant to water and weather, but it is also more resistant to acids and alkalis than a paint made with Gilsonite and a drying oil other than gas-proofed tung oil. The phrase film-forming constituents, as used in the claims, refers to those components of the film that do not evaporate after the paint has been applied and instead stay to form the paint film. No extraneous limits should be interpreted from the preceding extensive explanation; rather, the claims should be understood as broadly as is permissible in light of the prior art.
gilsonite paint
Generally, Gilsonite is utilized in a wide variety of industries, including those that produce bitomen asphalt paving mixes and coatings, chemical components used in metallurgical, adhesive, coating, and binder products, inks and paints, metal foundries, and oil well drilling and well completions. Gilsonite is a rich resource. Since ancient times, the paint industry has been making use of natural bitumen as well as Gilsonite. This component can be found in paints that are based on bitumen. The high nitrogen concentration of Gilsonite contributes to the material's improved adhesion and stability when exposed to ultraviolet radiation. This chemical is utilized most frequently in applications involving external coatings where it serves as a coating for automotive chassis and as a coating for metal structures. Additionally, it offers resistance to acid. Gilsonite, when combined with paints based on bitumen, results in increased hardness as well as adhesion. Anti-UV, anti-water, and anti-chemical characteristics Formulas for Gilsonite paint are commonly used when it comes to the construction of automobile chassis and radial tires. Gilsonite is also typically found in wood stains. Wood paintings typically make use of it as a medium brown paint. Paints and polishes are two applications where Gilsonite's unique chemical and physical capabilities can be put to use to the advantage of the user. 
There is no other chemical that comes close to matching the performance of the Gilsonite additive. In the production of paint, Gilsonite is typically combined with bitumen as the binder of choice (asphalt). After drying, the resulting paint will typically be extremely hard and brittle if Gilsonite was the only ingredient used to make it. The resulting paint is unusable when standard straight-run bitumen is used on its own because it is too tacky and soft. Therefore, in order to produce the appropriate level of hardness (penetration) and drying time in the finished paint, a combination of Gilsonite and natural bitumen is utilized. You can contact us for more information on different grades of Gilsonite and its variety of applications to purchase accordingly to your needs. Our sales executives are ready to help you with all your inquiries.