The Material Safety Data Sheet (MSDS) for Gilsonite provides information regarding the environment, health, and toxicity to employees and anybody who works with Gilsonite. It is sometimes documented according to some countries’ requirements. For example, a special msds for Australia. Executives must guarantee that they receive this information. It also contains information that will assist them in complying with community right-to-know/emergency response reporting obligations under standard legislation. If you resell this product, you must give the buyer with this Material Safety Data Sheet (MSDS) or incorporate the information into your own MSDS. The MSDS is intended to provide you with pertinent hazard alerts and health assessments and to assist you in complying with local, state, and federal regulations. A danger notice is not required by OSHA for gilsonite or its products. Due to the abrasive nature of the dust, this substance may cause eye irritation. The severity of the Injury will depend on the quantity of debris that enters the eye as well as the promptness and thoroughness of the first assistance administered. Some of the signs and symptoms are pain, tears, swelling, redness, and blurred vision. This risk estimate is based on data collected from related substances. 
In addition, neither cutaneous toxicity nor significant skin irritation is anticipated from this medicine. Inhaling dust at concentrations above the permissible exposure level may also irritate the respiratory system. Signs and symptoms of irritation of the respiratory system may include, but are not limited to the following: Possible symptoms include nasal discharge, sore throat, coughing, bronchitis, pulmonary edema, and breathing difficulties. The systemic toxicity of the drug has not been determined. It should be nearly non-toxic to internal organs if consumed. When dust comes into contact with sparks, open flames, or temperatures above 570 degrees Celsius (1000 degrees Fahrenheit), it can burn or explode. Before crushing or performing any other activity that generates dust, all sources of ignition must be eliminated. Long-term exposure to fumes, distillates, or solids produced by heating above 550°F (288°C) requires the use of protective clothing and respiratory equipment. 
gilsonite powder msds
Although no significant health hazards have been established for gilsonite, a Material Safety Data Sheet (MSDS) certificate is necessary. A Material Safety Data Sheet (MSDS) is a document that contains information on potential dangers (health, fire, reactivity, and environmental) and directions for working safely with a chemical product. It is a prerequisite for the development of a complete health and safety program. It also includes information about the material's hazards as well as usage, storage, handling recommendations, and emergency protocols. The MSDS provides more information about the substance than the label. MSDSs are generated by the supplier or manufacturer of the substance. Its objective is to describe the dangers of the product, how to use it safely, what to expect if the instructions are not followed, what to do if accidents occur, how to recognize symptoms of overexposure, and what to do in such cases. In a chronic feeding study conducted by the National Toxicology Program (NTP), mice and rats were fed diets containing either 2% or 4% GILSONITE for their whole lives with no discernible adverse health effects. 
In another investigation, the application of 10% GILSONITE in benzene to the skin of mice three times per week for eighty weeks did not result in an increase in skin cancer compared to the control group. A sample of GILSONITE heated to 550 degrees Fahrenheit (288 degrees Celsius) and cooled was not mutagenic in the Ames experiment of a third study. The National Institute for Occupational Safety and Health was unable to find polynuclear aromatic hydrocarbons in GILSONITE. The facts presented above indicate that GILSONITE has a low level of toxicity and is not carcinogenic. Although ER Resin is not carcinogenic, procedures that apply GILSONITE to extremely high temperatures may result in the formation of carcinogenic compounds by modifying its complex hydrocarbon structure. The thermal cracking of complex hydrocarbons results in the formation of polynuclear aromatic hydrocarbons, some of which are carcinogenic and mutagenic. On heated GILSONITE samples, Ames mutagenicity screening tests were run. It is not anticipated that ER Resin handling would cause cancer. On the other hand, skin contact and inhalation of vapor or mists should be avoided during operations in which ER Resin is heated to high temperatures. Please refer to the Special Precautions section of this document. 
gilsonite powder msds requirements
To know what are the safety requirements when working with Gilsonite powder, documentation called MSDS is often published. First, it's essential to know the nature of Gilsonite. Gilsonite is a naturally occurring hydrocarbon and one of the asphaltites, which are asphalt-like compounds with high melting temperatures (over 110°C). Additionally, glance pitch and grahamite belong to this category. Non-mineral components are entirely soluble in carbon disulfide. Without heating, gilsonite powder is soluble in aromatic solvents such as benzene, toluene, and xylene. Gilsonite is utilized in drilling mud fluids and cementing oil wells. Gilsonite, in a range of softening points and particle sizes, is a common component of oil-based drilling muds used in shales and other challenging geological formations. The use of carefully processed Gilsonite to water-based drilling fluids reduces hole washout by stabilizing problematic shales, sealing extremely porous sands, and minimizing torque and drag. While cementing, the addition of Gilsonite to oil well cement reduces slurry weight without sacrificing compressive strength and functions as an efficient bridging and plugging agent to seal fractures in weak formations. Gilsonite is also utilized in Mud Drilling for FLC " Filtrate Loss Control " or " Fluid Loss Control " in oil-based mud. In many instances, the tests conducted on Gilsonite are nearly identical to those used for asphalt. Gilsonite is not a manufactured item, but rather a naturally occurring mineral that is subject to processing. We treat the liquid distillate from the pyrolysis of solid Gilsonite with sulfuric acid to create a paraffinic fraction of nonreactive hydrocarbons. Evidently, the presence of pyridines and quinolones in the distillate was determined only by their odor. In addition, there are numerous hydrocarbon fractions in Gilsonite distillate that share many features with fractions of crude petroleum. 
gilsonite powder msds australia
Chemicals are categorized and labeled in accordance with the Globally Harmonized System (GHS) in Australia. When you are producing the MSDS, the classification information will be helpful to you. If you manufacture or import hazardous chemicals, you are required to create a Material Safety Data Sheet (MSDS) as soon as possible after you manufacture or import a hazardous chemical, review each MSDS at least once every 5 years, and ensure that your MSDS contain accurate and up-to-date information. MSDS is typically utilized as a risk management tool in the workplace by workers who are exposed to dangerous chemicals. You are required to create an MSDS for any hazardous chemical that you manufacture or import, unless the model Work Health and Safety Regulations exempt the substance from this need. An MSDS is not required for the disposal of non-hazardous compounds. You have the option of including information in an MSDS for a non-hazardous chemical if you make the decision to prepare one just like you would for a hazardous chemical. The Safety Data Sheet (SDS) is required to include a description of the potential dangers posed by the chemical as well as instructions on how to safely store and dispose of it, as well as information on the chemical and physical properties of the substance, as well as the effects on human health and the environment. 
You are required to organize the data according to the following headings: Section 1 - Product identification and chemical identity Section 2 - Identification of hazards Section 3 - Composition and ingredient information Section 4 - First-aid procedures Section 5 - Firefighting precautions Section 6 - Measures to Prevent Accidental Release Section 7- Handling and storage, including how to handle the chemical safely Section 8 - Personal protection and exposure controls Physical and chemical characteristics are covered in Section 9. Section 10 - Stability and responsiveness Section 11 - Toxicological data Section 12 - Environmental data Section 13 - Considerations for Disposal Section 14 - Transportation data Section 15 - contains regulatory information. Section 16 - Any additional pertinent information 
If you have any further questions regarding gilsonite specifications, price, or properties, don’t hesitate to contact us. Our professional sales executives are ready to guide you through the way and answer all your questions.