What is the best bitumen foundation?
Bitumen waterproofing is not just for roofs, but it’s also a key requirement and foundation for durable walls and floors.
bitumen foundation waterproofing
The layer of tar that we spray on the walls as part of the foundation restoration process is a crucial component. Asphalt, also known as bitumen, is the material that is typically used for this common outer layer. It is comparable to the material that is used for roofing.
Because it is impervious to the penetration of moisture, it is an excellent choice for preventing moisture from penetrating your concrete foundation and enhancing the water's ability to flow away from the area.
Even while this bituminous substance is a critical component in the process of waterproofing a foundation, you shouldn't put all of your faith in just this one layer of defense.
Bituminous waterproofing is a substance that is extremely sticky and adheres effectively to concrete surfaces, even when those surfaces are vertical.
It is also called tar coating or bitumen waterproofing, and it goes by these names. A spray is used to apply it to the affected area. Contractors make use of it due to the fact that it is resistant to moisture seepage and easy to apply.
The insulating qualities of bituminous waterproofing, on the other hand, are susceptible to degradation when this layer is subjected to persistent pressure in the form of soil expansions and water penetration.
Do not be fooled by the shortcomings; bituminous waterproofing is still crucial, and we employ this sprayable tar layer as an essential component of our services. Do not let weaknesses deceive you.
Following the cleaning and reinforcing of the weak spot, it's important to apply a bituminous coating directly on the exterior of the foundation walls. This will be done since bitumen has a high degree of elasticity, and it will also be used to repair any cracks that have appeared.
However, this is just the beginning of the process, and in order to achieve proper drainage, your house will require a more robust defense system.
When water is getting into your basement through a break in the foundation, your contractor will need to dig out the dirt where they believe the vulnerability is.
After we have determined its location, determined its appearance, shored it up, and applied the bituminous "tar," the excavation will need to be backfilled.
Crushed round stone, which is our area of expertise, can be added as an additional layer of waterproofing as an alternative to the traditional method of backfilling the area with soil.
Because of this, we consider this layer to be the foundation of the system. Although the application of a bituminous layer alone is insufficient to provide complete waterproofing, there are businesses that offer only this service and refer to it as damp proofing.
Because it is unable to effectively cover major fractures or holes, the layer will not be effective at preventing significant amounts of water from penetrating it.
The process of "damp-proofing" a foundation requires the same kind of surface treatment as "waterproofing" a foundation does, but the process does not end there.
We use this aggregate to backfill the space close to the foundation since it is a porous material, and this material prevents water from exerting pressure on the concrete and tar.
Instead, the moisture that is carried through the soil by the flow of waterfalls immediately down to the foot of the concrete when it comes into contact with the crushed round stone.
The weeping tile system will then collect it before directing it away down the drain. This will prevent water from entering the structure, which will lessen the likelihood of future foundation problems.
On the market nowadays, you may choose from a variety of different strategies to waterproof your foundation.
bitumen foundation coating
Polymer-modified asphalt is by far the most popular type. This particular coating is a liquid asphalt that has rubber polymers added to it.
Rubber polymers are added to asphalt to make it more flexible so that it can stretch over fractures caused by shrinkage. Now, even if there are cracks in the foundation, water will not be able to enter the basement.
When they are dry, waterproofing membranes made of polymer-modified asphalt provide a watertight barrier that is seamless, smooth, and continuous.
The use of polymer-modified asphalt as a waterproofing agent provides a number of desirable properties. In comparison to the costs of installing other waterproofing systems, this one has a very low installation price while yet providing excellent results.
Because they are liquid, they may be sprayed onto a foundation wall at a high rate of coverage. This is because of the fact that they are liquid.
In comparison to other methods of waterproofing, one man-hour of application will result in the treatment of a significantly larger area expressed in square feet of a foundation.
In most cases, the expense of the materials required to create liquid foundation waterproofing membranes is also lower. In point of fact, the cost of installation can be one-third to one-half of what it would be for other types of waterproofing goods.
Since many years ago, there have been products on the market that are designed to waterproof foundations. They have been demonstrated to be an effective means of protecting your belongings from the effects of water.
Most significantly, it is assumed that there will not be any leaks in a foundation that has been sealed with our waterproofing chemicals. You and the people you care about will have access to a living area that is both secure and conducive to good health.
The process of waterproofing a foundation is only the first step in making a basement dry. When constructing a structure, there are additional components and systems that need to be incorporated in order to guarantee that the basement will not become flooded.
- Drainage System for the Foundation
Every device that protects against water must come equipped with a ground water drainage system that is in good working order.
This is only a perforated pipe that travels around the bottom of a foundation and can either drains water to daylight or, if that is not possible, gathers the water in a sump pit.
This is done in order to prevent water damage to the foundation. The water around the foundation is pumped out by a sump pump, which is located there.
The removal of groundwater that gathers around a foundation and under the basement floor is the task that a foundation drainage system is designed to accomplish.
It is possible for water to enter the basement at the joint where the floor and the foundation wall meet in foundations that either does not have a foundation drainage system or have one that is not functioning properly.
- Grading of the Soil
In addition to this, the land around the building should be graded such that it slopes away from the structure. A grade that slopes toward the building might generate a pooling effect, which can cause water to rise above the area that has been treated with waterproofing.
When this takes place, water has the potential to seep through any fractures in the foundation and enter the basement.
For more information on bitumen and other bituminous products, feel free to contact us. Our professional sales executives are ready to give you all the necessary information and guide you along the way.
How useful is this article to you?
Average Score
5
/
Number of votes:
1
