wall hung toilet purchase price+picture
A wall hung type of toilet needs a bolt, Some may need 2 and some others may need 4, You should check the guide for installation that is provided by the manufacturers.
wall hung toilet dimensions
Your toilet is secured to the floor by 2 long bolts, known as closet bolts, which extend up through the toilet's base and are secured with nuts.
It's hardly worth the trouble to keep track of the decorative plastic covers that cover these bolts, which are provided with most toilets but are often lost or broken during cleaning.
The good news is that adapter kits and replacement caps are available which are a vast enhancement in both form and function over the standard caps.
Anchor bolts for the toilet are used to fasten the flange, which is the drain pipe's connection point, to the floor.
If there is dampness around the toilet's foundation, the anchor bolts might corrode.
If your seaside basement is damp, it might be because of a faulty toilet seal, humidity, or poor drainage.
Bolts are easily replaced, however, if they are rusty you should also check the flange.
If it's also corroded, it won't be able to hold the new bolts.
Take a size from the back of your toilet, where the bolt is located, to the back wall.
The toilet bolt is the bolt that penetrates the porcelain base of the toilet and emerges from the floor below; it is usually capped.
To help create a watertight seal between the toilet bowl and the flange, a toilet bolt is used to secure the fixture to the floor.
There are three possible methods of determining the distance: The distance from the wall to the toilet bolt might be 10, 12, or 14 inches.
Most people use a standard of 12 inches.
In the field of plumbing, this is referred to as a "12-inch rough.
" It's possible that these measures aren't always spot-on.
A 12-inch rough would be 11.
5 inches according to your system.
No matter if you're shopping for a toilet online or in-store, taking an accurate measurement beforehand is essential.
Throughout Europe, wall-hung loos have replaced the more conventional floor-mounted variety.
wall hung toilet carrier
To accommodate a commode that is installed in a wall stud hollow, a closet carrier system with either two or four bolts is attached to the studs.
American Standard recommends leaving a gap of 2-1/8 inches between the fixture studs and the finished wall.
Be sure you have everything you need by checking the owner's manual or looking online to see what your toilet came with.
It's not uncommon for the bolts on toilet tank lids to get wet.
The bolt heads at the bottom of the toilet tank are constantly buried in water.
If steel bolts are constantly submerged in water, they will rust.
Leaky water, humidity in the bathroom from an adjacent shower, and other problems can contribute to rusted toilet tank bolts.
The nut and the threaded piece that is outside of the toilet tank are similarly prone to rust, as are the bolt heads.
When remodeling or building a new bathroom, opting for wall-mounted toilets is a stylish and low-maintenance alternative to the standard floor arrangement.
Wall-mounted toilets are regular toilets that are fastened and plumbed into the wall as opposed to the floor.
The intake for the water supply and the pipe for the waste disposal is hidden behind the wall.
Since the tank must be installed inside the wall and the plumbing must be moved from the floor, the labor and materials required to construct a floating toilet may be rather pricey.
While some designs of wall-hung commodes are floor-mounted, the piping is concealed within the wall.
As a bonus to their practicality, they update the bathroom to a more contemporary style that's easier to clean.
There are a few various ways to attach a "floating" toilet to the wall.
The most obvious change is the bowl's shape, which is now lower than the floor because a pedestal no longer connects it to the ground.
As there is no tank behind the bowl, it seems to "float" over the floor of the bathroom.
The majority of users are comfortable with the basic functionality of the wall-mounted toilet, which is to press a button to remove waste from the bowl.
The toilet actuator is a switch that is mounted on the wall over the bowl.
There is often a full flush and half flush button on the tank's lid instead of a flapper lever.
A smaller water tank set within a steel framework is concealed behind the wall.
The carrier frame is securely installed on the floor and braced between the wall studs.
wall hung toilet plumbing diagram
The toilet bowl attaches to the carrier frame, therefore it must be securely fixed there.
When the plumbing and toilet mounting points are in place, the wall may be finished with drywall.
The concealed toilet is put on the wall in the same way that a standard toilet would be.
Since the bolts are screwed into place on the carrier above the wall tile, it is essential to use the carrier that corresponds to the design of the toilet.
The cistern, or watertight tank, is constructed from one solid piece of plastic that has been molded and then thoroughly welded together.
Many designs provide an extra insulating layer around the tank's outside to prevent condensation after installation.
To a certain extent, the flush mechanism in the tank above the cistern works like that of a standard toilet, but its parts are entirely contained within the tank itself, and there is no external rod or chain to wear out or break.
Get in touch with a pro to check the configuration and functionality of everything and head off any problems in the future.
If there is a need to make modifications within the tank, there is enough room in front for an adult hand to reach in and make the necessary adjustments.
In conclusion, wall-hung toilets are perfect for small areas so many people are buying them.
If you are searching for wall hung type of toilet or even any other type, we are here to help you.
How useful is this article to you?
Average Score
5
/
Number of votes:
1
