There are numerous options available to you when it comes to the fittings for your toilet seat. When purchasing a toilet seat, you can choose from two distinct types of fittings: top fittings and bottom fittings. The majority of modern toilets now come equipped with fixed top-mounted seats because of how easy it is to both install them and remove them so that they can be cleaned. The kind of toilet that you are installing or the fixtures that you want to replace at the location will have a significant impact on the toilet fixtures that you require.
- Bottom Fittings Toilet Seats
The typical method of installation for toilet seat hinges that attach to the pan at the bottom involves inserting two bolts into the pan and then securing the bolts from the bottom. Therefore, this is the most common application for wing bolts. 
However, if you are able to reach beneath the toilet and put your hand on the bolt, you will require a toilet seat with a bottom fix installation.
- Top fittings Toilet Seats
As their name suggests, toilet seat hinges with top fixings are operated by inserting two-bolt fasteners into the pan and then securing them in place using a top-mounted screw. One could think of this as being analogous to a divider plug, which is inserted into an opening in the divider. In the event that you are unable to access the toilet fixing or are unable to view the toilet fixes stated above in a bottom fix toilet, it is conceivable that you will require a top fix seat instead. As a consequence of this, having an understanding of the construction of the seat is essential in order to successfully repair the seat's hinges. 
- Determine the length and width of the hinges
The next thing you need to do is select the appropriate measurements for the toilet seat hinges. It looks like the hinges on the toilet seats are all the same. However, that is not how things are right now. There is a wide range of sizes available for toilet seat hinges. In any event, you can choose from a variety of different sizes. Take into account the length of the toilet seat while selecting the appropriate size of hinges. The width of the toilet seat hinges is something that should be considered on occasion, but only in the extremely uncommon event if you have a designer toilet seat. By popping the top where the screws are positioned on the turns, you can see the total number of screws. The time required to measure the distance between the screws is likewise minimal. 
- How to Determine Which Toilet Seat Hinges Are Right for You
The majority of the time, the costs associated with toilet seat hinges are low. Find the toilet seat hinges that are the proper size for the job, both in terms of the number of screws and the space between each of them. When you start to think about the price, you can cross such styles off your list. There are several varieties of toilet seat hinges available, including the following:
- Plastic is not just low in cost but also low in strength and very simple to replace.
- Metal is always getting better looking, it's quite durable, and it's not too expensive.
- Designer urinals are often more expensive and are exclusive to particular brands of toilets.
These pneumatic toilet seat hinges are pricey but prevent the seat from collapsing. Despite their expense, they are a necessity. They are available in a variety of sizes to choose from. 
You can often measure a rod and hinge for any toilet, despite the fact that doing so will cost you. It consists of a single metal arm that is stretched and hinged. Determine which toilet seat hinges are appropriate for your particular toilet. Take into consideration the atmosphere or the viability of the pivots at that moment.
- Putting in place the hinges for the toilet seat
To remove the old toilet seat, first, open the screw cover and then remove the screws holding it in place. After that, the screws that came with the replacement toilet seat hinge need to be fastened to the base of the toilet. After that, you should put the seat in its proper location and link it to the top hinge. 
toilet seat fittings
If you want the seat of your toilet to be held in place by the correct fittings, you will need to be familiar with the correct way to set the toilet in place using those fittings. If you want to be sure that your seat is fitted correctly, follow these steps: The vast majority of seats feature a locking screw that may be inserted through the hinge plate and into the underside of the hinge in order to make adjustments to the hinges. Once any necessary modifications have been made, the screw should be tightened. You normally have three options for making adjustments, which are as follows: Fine adjustments can be made by rotating the hinge plate, which ensures that each of the mounting bolts will fit into their respective holes in the toilet pan or bowl. 
You can slide the entire seat forward by rotating both of the hinge plates across an angle of 180 degrees (or backward). Both of them will move if it is allowed to dangle over the edge of the seat or if it is not allowed to contact the front of the bowl. In addition to this, it moves the hinge forward in order to prevent the lid and ring from toppling over when they are resting against the cistern. Even though turning the hinge plate in the opposite direction has the same effect as what was described earlier, certain toilet seat mounting brackets feature additional holes that the fastening bolt can be placed into. Because of this, more customization is possible, which would not have been possible before. Adjust the Hinge Locking Screw so that it is snugger: Even if you don't plan on replacing the hinge, make sure the screw is nice and snug. 
If this is not tightened, it will grow even looser, and as a result, the seat will become unstable and slide around on top of the bowl, which is very irritating. The only solution to this problem is to remove the seat and then properly adjust the screw.In all of the excitement of putting in a brand new seat, the vast majority of people forget to take this step. If the bolt that is used to correct the problem can be moved, make sure it is as tight as possible. There will be a plastic or rubber washer that will and must sit between the pan and the metal plate if the hinge plate is metal. This washer will be between the pan and the metal plate. Put the seat and the fixings on the toilet, and make sure the ring and the lid are in the down position. 
This reduces the risk of corrosion and, more importantly, protects the porcelain from being chipped or otherwise damaged. Put the washers and the bolt that secures it in place. It is important to make sure that the metal and ceramic components of the pan do not come into contact with one another. Since this is not always easy to achieve, you should exercise caution when arranging the components. Protecting the pan with plastic or rubber washers is a common practice. If there is a metal washer available, you can use that to evenly spread the pressure. 
The bottom fixing bolt ensures that everything is in place and secure. After a few days have passed, it will be necessary for you to return and tighten the fastening bolts once again. In the end, even the tiniest details can have a significant effect on the overall appearance of a bathroom. There is no question that the toilet seat you choose can affect your experience. The many different types offered by our company provide you with a wider range of options to choose from, regardless of whether you are drawn to the ease of use and cutting-edge technology of modern design or you would rather have a basic wooden chair for a more traditional feel.