Considered a lot these days is its water absorption percentage.
This percentage is determined by the type of soil used to produce the tiles which helps us to choose the most accurate tile by examining the weather conditions of our residence.
The amount of water absorption in each tile is different.
Its percentage is determined through a simple experiment.
The weight of the tile is first measured before the test and then placed in boiling water and the water absorption of the tile is measured on its weight scale.
Eventually, the ceramic tiles are classified based on their water absorption percentage.
If the amount of water absorption is higher than the standard, the ceramic tile absorbs a lot of water, and after tiling, quality defects such as discoloration, blurring, falling, and cracking occurs.
Additionally, one of the issues that affect the amount of water absorption of tiles is their density level.
In fact, as a general rule, the higher the density of the tiles, the lower their water absorption.
However, it does not mean that the lower the water absorption of all the tiles, the better.
Conversely, some products require more water absorption to ensure the quality of the furnaces.
When buying, you can check the instructions on the tile packaging to understand the water absorption of the product.
Consciously water absorption is a key indicator of tile quality, but it is not an absolute indicator.
Monitoring low water absorption can also cause problems.
Different spaces have different requirements for water absorption.
Ceramic Tiles’ Water Absorption Limit
The limit of absorption of ceramic tiles water determines the amount of moisture that a continuous base can hold and provides insight into the surface resistance to water and other liquids.
This measurement is obtained by boiling a piece of tile and thus paying attention to its weight gain.
In the first category, some tiles absorb 7% more water than their weight.
These ceramic tiles are not appropriate for outdoor and cold areas as well as humid spaces such as bathrooms and toilets.
The next classification includes tiles that absorb water between 3 to 7 percent.
These ceramic tiles are not recommended for outdoor areas like the first category.
On the other hand, these ceramic tiles are suitable for indoor and dry spaces
The third kind includes ceramic tiles that absorb between 0.
5 and 3 percent of water, which is one of the most suitable types for indoor and outdoor environments of buildings.
The last category includes tiles that absorb less than 0.
5% water.
This classification includes the densest type of ceramic tiles that are suitable for different parts of the building and include porcelain products.
So, for swimming pools and places where there is a lot of water and humidity, it is better to consider buying porcelain ceramic tiles.
As you can see, the amount of water absorption of ceramic tiles and porcelain tiles has a direct effect on the suitability of a particular type of ceramic tile for a particular environment.
Water Absorption Tiles in Bathroom
The water absorption of ceramic tiles that are used for the floor is not the same as the ceramic tiles for the bathroom and kitchen, and you have to use ceramic tiles with special features and characteristics, depending on the application of the place used.
The bathroom is one of the items that should be carefully selected and used for ceramic tiles.
It does not matter how you design or build your home; If improper ceramic tiles are used, the whole look and feel will be lost.
By choosing beautiful ceramic tiles, this point of the house can be turned into a beautiful place.
You can limit your choices and make the final choice much faster and more accurately by keeping just a few key points in mind.
The next point regarding the quality of ceramic tiles in the bathroom is the amount of water absorption in it, which can be used for environments such as the bathroom that need to be washed regularly.
Ceramic tiles that have a high water absorption rate are low.
The best type and the highest quality tile that has little water absorption is porcelain tile.
Porcelain tiles can also be a good choice as they can normally absorb water slowly.
To install bathroom floor tiles, try to use one that is suitable for walking when wet.
These choices for the bathroom can guarantee you strength for a longer period.
Try to choose different models of ceramic tiles for the bathroom and use one that is easy to clean.
Porcelain Tile Water Absorption
Porcelain ceramic tile is among the products that have a water absorption rate close to zero due to high-temperature firing and high density.
At first glance, ordinary ceramics and porcelain ceramics are almost similar to each other and they are not so different for the average viewer, but the fact is that they are completely different in terms of technical specifications.
Porcelain ceramics are much denser and have much fewer pores and porosity than ordinary ceramics, which is related to the way they are made and produced.
The most important difference between these ceramics is their water absorption.
The water absorption of porcelain ceramics is divided into two groups A and B according to the standard, in the first group water absorption is less than 0.
5% and in the second group water absorption is less than 3%.
While ordinary ceramics have a water absorption of between 3-10%, this water absorption is generally about 5-6%.
It makes porcelain tiles harder and less moisture-permeable than regular tiles.
The Low water absorption of porcelain tiles, in addition to greatly increasing their resistance to cold and frost and preventing them from cracking, prevents stains and contaminants from remaining on them and is easy to wash.
This is why most people are looking for porcelain tiles.
Because this ceramic tile is one of the most suitable types for bathrooms, exterior wall coverings, pools, and floors.
With this brief explanation, we found that porcelain ceramics are stronger and more durable than ordinary ceramics, although it cannot be claimed that ordinary ceramics have very low strength.
Consciously, to have the best quality of porcelain tiles at the most reasonable price, just fill out the form on our website.