to purchase a tile saw or use a rental one is of the puzzling questions for users. There are different tile saw sellers like home depot. For serious tiling jobs, there's no better tool for cutting tile than a wet saw. While there are other tile cutting methods that will work well for you for small jobs, if you are laying a bathroom or large floors your job will be much easier with a tile saw. Wet tile saws are similar to miniature table saws, with a few exceptions. On the one hand, it is equipped with a special diamond-edged carbide blade, which is completely different from the saw blades used for cutting wood. Rather than tearing the tough ceramic material, it effectively grinds it down. The blade of a wet saw is much like a thick carbide blade on an angle grinder.
Although not particularly fast, it is the fastest way to make straight cuts on tiles, porcelain, and natural stone tiles. Tile saws also work differently. The tile saw has a sliding table that feeds the tile into the hanging blade. For example, a miter saw holds the wood stationary while the cutting blade moves to meet it. With a tile saw, the reverse is true: the blade is stationary while the material moves to meet the blade. The tile saw's most unique feature is that it includes a reservoir that pumps water to where the diamond blades cut the tiles. The water flow keeps the blade and ceramic material cool and reduces dust and droplets. Most tile saws use two different modes of delivering water to the work material: circulating water or soft water (though some tile saws have either recirculating or fresh water modes).
- circulation pump
In this mode, the wet tile saw continuously circulates and filters the same water from the lower basin. This eliminates the need to connect to a faucet. The downside is that chips and debris from the cut tiles can begin to clog the circulation pump inlet screen.
- fresh water
In fresh water mode, the tile saw draws water directly from the water source. While this ensures a constant flow of clean water, it also means you can't stray too far from the water source. Also, there are some other methods to cut a tile:
- Snap or Rail Tile Cutter
An inexpensive tool called a rapid tile cutter or orbital tile cutter is great for small jobs that don't require a lot of cutting. Breaks using speed shears can be uneven and unpredictable, resulting in waste. Quick cutters work best on thinner wall tiles; they are difficult to use on thick floor tiles and do not work well at all with harder tiles or very hard natural stone tiles. In contrast, wet tile saws can make clean, predictable cuts on virtually any ceramic, porcelain, or stone tile.
- circular saw
Ordinary circular saws equipped with abrasive diamond blades can also cut tiles. This blade is sold for exactly that purpose. This is a dry cutting process that is messy and potentially dangerous due to shards and shards of glass.
- Angle grinder
An angle grinder with a diamond blade can be used to cut small sections of tile. Like a circular saw, it's a dry cutting tool, so dust and flying debris are a problem. Cutting tiles is not like cutting other types of materials - breakage is common and the risk of sharp particles splattering is very real. It is not a tool for any other purpose. It is only used to cut tile or stone, nothing else. Based on the local tile saw rental rates, with only a few days of tiling, buying an average quality saw is a better deal than renting. As a general rule, if you only have one room to tile and expect the job to be done in a day or two, it may make more sense to hire the tool. Available storage space may also be a consideration. Wet tile saws with water storage bins are bulky, cumbersome tools. If storage space around your home is limited, you may prefer to rent a saw when needed.
- advantage
- A better quality saw than you can buy yourself
- No storage problems around your home
- disadvantage
- Multi-day tiling is not economical
- The hassle of renting and returning tools
Wet saws are specialist machines and, like table saws, they come in a variety of qualities and prices. Some retailers offer wet tile saws for less than $200. Unlike a table saw, however, this is a unique tool that you can only use for tiling. If you have two or more rooms to tile, or want to tackle another big tiling job in the future, buying a quality, a low-cost wet tile saw is a good investment.
- Advantage
- ready-to-use tools
- Can be cheaper than renting large projects
- Disadvantage
- Cheaper machines may be of lower quality
- storage problem
If you have a small number of tiles to make, or are just replacing a few tiles, and want the convenience and ease of a wet saw, a tabletop tile saw is available. These tile saws are less expensive, ranging in price from under $100 to $200. They are similar to table saws but use a system where the diamond blade is partially submerged in a reservoir. They are smaller, less powerful, and slightly slower than traditional tile saws, but can be a good solution for small DIYers or if you're not sure if owning a standard tile saw is right for you.