How is it possible to dye suede leather shoes? If you were unable to acquire a pair of suede shoes in a color that you liked or if you just want to update to a more fashionable look, dying your old suede shoes is a frugal alternative to throwing them out. It may sound like a difficult endeavor, but in reality, it's fairly simple. All you'll need is a special suede dye, a brush with stiff bristles to apply it, and some time to allow each coat to sink in. Be careful not to make a mess while you're working, and after you're finished, make sure to set the new color by spraying the suede with a water-repellent before you put it away. Making Preparations for Dyeing the Shoes: Invest in a dye that has been developed with the usage of suede in mind. In contrast to more common sorts of dye, which simply flake off of surfaces when applied, these dyes are formulated to deeply permeate materials that have a soft, textured surface like real leather. Look around until you discover a color that you like and that you believe would look well on the shoes that you are changing; keep in mind that the more vibrant the color, the better. 
For this to operate properly, your shoes must be made entirely of suede. This won't work if they contain a significant amount of synthetic components. It is important to keep in mind that going from a darker tint to a lighter one will not be achievable. Because of this, you will have the best results in dyeing shoes that are already light or neutral hue, such as white, grey, or khaki. Many manufacturers specialize in dyes for suede, including Fiebing's, Angelus, Lincoln, and Kiwi, all of which have received positive reviews. Use a suede shoe brush with gentle bristles to smooth down the suede. Move the brush around on the entirety of the shoe's exterior surface. It will be much simpler for the dye to penetrate the fabric deeply if you first give it a light brushing to eliminate any problematic dust and dirt and to get the microscopic threads standing on end. Be sure to brush the grain in all of the different directions, not just the way it lies naturally. If it's dirty, you should clean the suede. The majority of dried dust and debris may probably be removed with a good once-over from a brush. 
However, if the shoes have been subjected to a significant amount of wear and tear, they may require more comprehensive treatment. To thoroughly clean the shoe, start by wiping it down with a sponge or towel that is damp but not dripping wet. The phrase "all over" is the critical component in making certain that the moisture penetrates the entirety of the shoe and gives it an overall uniform appearance as a result. Cornstarch can be used to get rid of those annoying oil stains by sprinkling it on the stain and then brushing it off after it has had some time to absorb the majority of the filth. Dry cleaners and shoe repair specialists are your best bets for removing stubborn stains. All external equipment should be covered or removed. If the shoes contain laces, remove them and put them somewhere safe. To protect any other visible elements, such as buttons, zippers, stamps, and accessories like sequins, use small pieces of painter's tape to create a barrier. While you're doing it, fold a few pieces around the outsole of the shoe (unless you intend to recolor this region as well). 
Tape whatever it is that you don't want to be ruined before exposing it to the dye because the dye will leave an irreversible stain on anything that it comes into touch with. To conceal more challenging regions, such as logos or stripes, cut the tape to the appropriate lengths. The newspaper should be used to stuff the shoes. To stuff, the toe and heel sections, crumple several sheets of newspaper into loose balls and then push them down into the toe and heel sections. During the dying process, it will be easier for the shoes to maintain their shape if they have been stuffed with a material that has a lot of volumes. Additionally, it will prevent the wet dye from seeping into the interior of the shoe. It is important to stop stuffing before reaching the shin or ankle area while working with high-top shoes and boots. Alternately, you might make use of some worn-out rags in place of the newspaper. Just keep in mind that anything the dye comes into contact with will be permanently marked. To ensure a smooth application, grab a brush. The vast majority of suede dyes are sold alongside a specialized applicator tool, which makes their application significantly simpler. 
In most cases, these consist of little more than a cotton ball that has been strung onto a piece of wire. If you use a more robust instrument, such as a little scrub brush that is attached to a handle, you will have greater results. Any brush you choose to use should have firm bristles that can penetrate deeply into the suede and get into every nook and corner of the surface. A toothbrush that has not been used, but is clean, can do admirably in place of an applicator in a pinch. Take the paintbrush and dunk it into the dye. After completely soaking the bristles in water, allow any surplus dye to trickle into the designated container. As you move the applicator back and forth from the dye bottle, you should be aware of the possibility of drips and splatters occurring. With each application, you should aim to rub in approximately half a teaspoon of dye. It shouldn't be necessary to water down the dye or combine it with any other chemicals in any way unless the directions specifically say to do so. Put on a pair of rubber gloves if you don't want your hands to get discolored since this is a smart idea to prevent staining. 
Cover the shoe in the dye and let it dry. The dye will be transferred to the shoe in a single, huge glob by running the head of the brush over the surface of the shoe. Be sure to start with a little amount; if necessary, you can always add more at a later time. Beginning with a large, flat surface, like the heel or toe, and working your way to the more constrained areas from there, start with the heel or toe. It is important to avoid getting the suede completely soaked. If you use too much dye in one region, you run the risk of creating permanent black spots, which are notoriously difficult to remove and can make the surface look uneven. Applying the dye to the suede with slow, circular motions will provide even distribution. Continue working on the shoe in manageable chunks until the whole thing is covered, paying close attention to ensure that no gaps are visible. It ought to start taking on the new hue straight away. Work carefully and methodically to prevent making errors that aren't essential, especially at the beginning of the process while you're still getting used to the method. If the seams don't accept the new color very well, you shouldn't be too astonished about it. Synthetic thread, which is used to sew many of today's shoes, is not as absorbent as the natural materials that are used in traditional footwear.
💰 Tenfold your income 💎