اتصال به اینترنت شما ضعیف یا قطع است.

Buy all kinds of steel rebars at the best price

Rebar or steel bars are used to increase the tensile strength of concrete because concrete is weak in tension but strong in compression.

Steel is only used as reinforcement because the elongation (coefficient of thermal expansion) of steel at high temperature is almost equal to that of concrete.

Reinforcing bars (abbreviation for rebar), also known as rebar or rebar, are steel bars used as tensioning devices in reinforced concrete and reinforced masonry structures to strengthen and assist concrete in tension.

Concrete is solid underweight but has poor tensile strength.

The reinforcement significantly increases the tensile strength of the structure.

The rebar surface has a series of continuous reinforcements, clips or depressions to better bond with the concrete and reduce the risk of slipping.

The most common type of rebar is carbon steel, usually consisting of hot-rolled round bars with deformed patterns etched on the surface.

 

Reinforcig Steel Types And Specifications

Reinforcing bars are steel or wire products that are used as tensile tools in reinforced concrete and reinforced masonry structures to strengthen and assist solids under pressure.

Concrete is solid under pressure.

However, its tensile strength is poor.

Reinforcement greatly increases the elasticity of the structure.

The surface of the rebar is often deformed, with ribs, the space creates a good bond with the solid concrete and reduces the risk of slipping.

And Type of rebar: Hot rolled deformed steel bar Cold worked rebar Ordinary low carbon steel bar Deformed steel bars and others BS 4482: 2005.

Steel wire Reinforcement of concrete products Specification BS 4482:2005 specifies requirements for plain, serrated, and ribbed wires used to strengthen concrete products.

This standard includes provisions for two classes based on mechanical properties.

Level 500 is specified for flat, grooved, and ribbed lines. 

 

Tepes Of Rebar

Type of rebar: Hot rolled deformed steel bar Cold worked rebar Ordinary low carbon steel bar Deformed steel bars and others Hot rolled deformed steel bars: Hot-rolled deformed steel bars are the most popular steel bars for conventional RCC structures.

Hot rolling is done in the factory and involves changing the shape of the surface, such as ribs, so that it can create a bond frame with the concrete.

The stress-strain curve shows a distinct yield point, followed by a plastic phase in which the stress-free strain increases, followed by a strain-hardening phase.

Cold work steel bars: Cold-worked steel bars are made by cold-rolled hot-rolled steel bars.

During this process, the rebar is twisted and stretched.

The process is carried out at room temperature.

Raw steel bars do not yield plastically; This approach provides less flexibility when compared to hot rolled bars.

 

Deformed Steel Bars

Deformed rebar is a type of rebar.

Generally, it has three types of ribs on its surface: spiral, chevron, and crescent.

High-strength deformed steel bars can be used directly in reinforced concrete structures or as prestressed steel bars after cold stretching.

Due to its high flexibility, it is widely used as a building material in many fields.

 

Difference Between T and Y

What do the T and Y bars mean? T which is known as rebar or rebar in TMT Rebar Manufacturers Kolkata stands for Tensile Strength and Y stands for Yield Strength.

Both are essential because they affect the production of steel and its use.

What is tensile strength? Stretch is the ability to stretch or stretch.

The tensile strength of steel bars is their resistance to failure under tensile stress.

This is the point at which the steel structure changes shape - from elastic to plastic, that is, from temporary to permanent shape.

Best quality TMT rod manufacturers in Kolkata measure tensile strength in units of force per cross section.

When steel goes beyond its tensile stress point, it cracks.

The tensile strength of TMT rebar indicates how much the steel can withstand tensile stress before failure: ductile failure or brittle failure.

How useful is this article to you?

Average Score 5 / Number of votes: 1

Comments (26 Comments)

sonya

Today, metal rebars are used in all multi-story buildings and make them stronger

0

0

Samaneh

Steel bars are sharp and you should be careful when transporting them

0

0

elham

These explanations you gave were very useful and necessary for me, thank you

0

0

Keramat

One of the desirable properties of steel is to be environmentally friendly. Although large metal structures that are huge skyscrapers may not be imagined at first glance, their durability means that, for example, it does not become a toxic substance and They do not leak into underground water and other areas

0

0

DH

One of the metals used for construction is steel rebar or iron rebar

0

0

Anasheid

We use steel bars for the initial construction of houses to make the house strong

0

0

Mohamady

Hi, what countries do you export to?

0

0

Keramat

The difference in performance between iron and steel may not be readily apparent, even if it appears to be mainly different in a different way. Other properties and uses of steel include its technical and mechanical properties.

0

0

Sajad

Hello good day ?.Steel bars are sharp and you should be careful when transporting them

0

0

hosseini

Steel bars and pipes are very strong and durable because they are made of steel products

0

0

Hehnam

A lot of your information was great for me and I benefited from it a lot

0

0

Bahar

Steel is one of the important and necessary alloys in the manufacture of important appliances

0

0

Parva

Hi, nice article.
We can mention deformed debar as a kind of debar.

0

0

Ali vafadar

Deformed rebar has a ribbed surface and is used typically to apply tension within reinforced concrete structures because it has a higher tensile strength than regular reinforced steel bar.

0

0

hosseini

Hello, good time, rods and tubes made of iron, aluminum and other metals

0

0

Mojtaba

Rebar is one of the main pillars of the building and is resistant to heat

0

0

Sareh

The Russian system, which is used in Isfahan iron smelting factories, rebars are made up to 40 mm in diameter

0

0

Faeze

An excellent product with high quality that has a long life and the price is very good and reasonable

0

0

Sara sareie

Knowing the details of the composition of steel is very interesting and important for those who prepare and use it, because they understand everything that is needed from the beginning.

0

0

Hani

Hello, it was interesting content These bars are produced in cross-sections from 6 mm to 50 mm in diameter.

0

0

Melina

The use of steel rebar in concrete is used to compensate for its tensile strength. Rebars are produced with different standards and in each standard there is a specific classification according to the mechanical properties of the steels.

0

0

mary

I saw these metal structures in construction. They are very heavy, I think working with them requires expertise and technique

0

0

marya

Steel rebars are one of the most widely used steel products that have a special application in construction.

0

0

hosseini

Rebars are produced with different standards and in each standard there is a specific classification according

0

0

Ftme

Steel Rebars Detail Types Of Deformed Specification
It is a very good and excellent product whose quality is excellent and the price is very reasonable

0

0

abbasi

Rebars are produced with different standards and in each standard there is a specific classification according to the mechanical properties of the steels.

0

0

Alimohammad Makouee