In which one, marble or travertine, is there a higher porosity? Is this feature on the tile the reason for raising or lowering the sale? Marble and travertine are both typically robust and long-lasting enough to survive the wear and tear of regular use. Travertine is naturally softer and more porous than other types of stone. As a result, the many holes that are found on the surface of the tile can make it more susceptible to etching and scratching over time. The porosity of travertine can be described as Porosity levels of approximately 50% are normal for cold spring travertine, whereas porosity levels of approximately 26% are typical for hot spring travertine. Speleothems exhibit porosities that are lower than 15% on average. 
According to the definition, porosity refers to two things: -Molecular distance in things -The ratio of permeability This indicates that molecular spacing is the only factor that differentiates an item that has porosity from a piece of the same material that does not have porosity. The porosity may be achieved without raising the weight or introducing another chemical. 
Porosity can be found in both natural and man-made stones; however, the degree to which it manifests varies greatly from one type of stone to another. As an illustration, the porosity of granite stones is exceptionally low, whereas the porosity of travertine stones is exceptionally high. The porosity of the material might also be advantageous. It is possible for it to be useful or harmful, depending on factors such as the location where it is carried out, the weather, and other such factors. Porosity that is useful When it comes to stone facades, porosity is quite significant, particularly on the exterior of the structure. This porosity is very useful in travertine stones, and it can be claimed that this is one of the primary reasons why travertine is not popular these days. However, this porosity is highly useful in travertine stones. This porosity in the travertine stone enables the stone to have penetration routes, and the cement mortar penetrates into it. As a result, the cement mortar binds the stone extremely effectively and firmly, and this stone does not separate from the facade as a result of impact or heating and cooling. 
The porosity of marble and granite stones is quite low, and this is one of the flaws that can be found in these stones when they are used in the facade of a structure, particularly the exterior. Because the stone and the facade are supposed to be kept separate, those who select either of these two types of stone for their building will need to resort to other techniques, such as scooping the stone, in order to keep the stone in place on the facade. The drawbacks of having a porous structure When stone is utilized in the outside carpet floor of a structure, the porosity can be problematic and even hazardous. When it rains in the winter and there is frost outside, water can seep into stone that has a lot of pores and then freeze there. This can cause the stone to crack. In addition, you should make use of marble stones or, even better, granite stones for this particular objective. Because these stones are resistant to water penetration despite the absence of porosity, and as a result, their lifespan is increased when they are used horizontally outside in environments with high humidity. Which rock has more porosity? 
As mentioned in the text, one of the most porosities is observed in travertine stones. This is due to the ingredients of these stones and the conditions of their production in the layers of the earth. As mentioned, exactly this and the presence of these pores have made travertine a very suitable option for use on the facade of the building and vertically, and the presence of these holes in the face of the stone makes it unnecessary for the operator to use a scope or plate roll. But on the other hand, it should be pointed out that this porosity and hole exist behind the stone as well as on the stone, and it is unavoidable that in order to create a wonderful and shiny surface on the stone, travertine stones will need to be created by a resin and putty worker before the sub process. After the sanding has been done on the stone, they are utilized to give it a surface that is even and smooth. We made an effort to provide you, our valued customers, with all of the pertinent information regarding the porosity of stones in the article that was just read. It is hoped that the objectives of this expedition have been successfully met. You may easily call our specialists by using the numbers that are located at the top of the page, and you can take advantage of our no-cost consultations if you require additional advice for any reason.
💰 Tenfold your income 💎