To successfully cut porcelain tile with a cutter, you must have a thorough understanding of how to operate a tile saw. A tile saw can cut ceramic and marble, among other materials. Tiles are typically fabricated from ceramic, but this is not always the case. Numerous sorts of materials, including porcelain, glass, stone, plastic, and metal, can be used to create tiles. When cutting porcelain tiles, it is essential to remember that these materials are exceedingly fragile. 
Due to porcelain's extreme hardness, it is difficult to cut without causing damage. But if you know what you're doing, you can cut any sort of tile using a tile saw. Using a Tile Saw The initial step in utilizing a tile saw is to prepare it for use. Before attempting to cut porcelain, you must thoroughly clean the blade. To do so, remove the top cover and thoroughly wash down the blade. Replace the top cover and activate the machine. After adjusting the blade's height, attach the tile to the blade. Place the tile onto the motor shaft, which will link it to the blade and baseplate. Finally, tighten the clamping screws to firmly secure the tile. To begin cutting porcelain tiles using a tile saw, decrease the speed by one notch. Then, gradually lift the blade until it is about 1/8 inch above the tile's surface. Move the blade back and forth over the tile to form the proper shape once it has reached the necessary height. When Cutting Porcelain Tiles, Care Must Be Taken Consider the following points while cutting porcelain tiles: 
Maintain the blades' sharpness. Use caution when tightening the screw clamping mechanism. Overtightening the tile may cause it to break. Ensure that the tile-cutting blade does not touch the floor or anything else. The tile may shatter if something contacts the blade while it is in motion. Utilize enough lubrication. After each cut, the blade should rest for a few seconds before being used again. This allows the blade to cool and makes it simpler to control. Use a non-synthetic oil (such as mineral oil) or petroleum jelly to lubricate the blade. Avoid synthetic oils, as they might cause blade damage. Utilize a tile saw for safety purposes. You don't want to unintentionally cut yourself, so avoid using the tile saw near walkways. Position the tile saw instead behind a piece of plywood, cabinet door, or other strong item. The benefits and drawbacks of utilizing a tile saw Pros:
- A tile saw can readily cut porcelain tiles of various shapes and sizes.
- It is reasonably secure. There are few dangers associated with the use of a tile saw. However, you must still use caution when working with the instrument.
How to Cut Porcelain Tiles using a Porcelain Tile Cutter If you have already worked with wood, cutting porcelain tile is not very difficult. Actually, there are three distinct sorts of cuts that can be made on porcelain tiles. They may be cut with a jigsaw, handsaw, or laser cutter. But before we begin, allow me to provide some background information on each tool. 
First, the jig saw performs well on ceramic tiles because they are hard enough to resist chipping and cracking, unlike softer materials such as plywood. Ceramic tiles are also easier to cut than wood due to the absence of a grain pattern. In contrast to a jigsaw, a handsaw might be useful if you need to cut a small number of pieces at once. Finally, if you intend to perform a significant amount of cutting, I would recommend acquiring a laser cutter. A laser cutter is essentially a high-powered light beam that descends onto a platen of metal. The beam warms the platen, causing a diamond-shaped blade to remove a significant amount of metal. If you have ever worked with glass, you understand how sharp the blades must be in order to penetrate the substance. The same is true with pottery. Laser cutters are expensive, yet they outperform handsaws and jigsaws in a variety of applications. Now that we understand what these instruments are for, let's begin chopping!
- JIGSAW
A jigsaw is a very versatile instrument that can be used to cut virtually anything. It is suggested for slicing tiny quantities of materials. A jigsaw has the advantages of being relatively affordable and simple to operate. Keep in mind, however, that a jigsaw is not ideally suited for cutting larger materials. One reason why a jigsaw is not ideal for cutting porcelain is that the material does not maintain its shape when being sliced. When the temperature rises, the plastic components fuse together and the blade becomes dull. Given that porcelain is tougher than plastic, this issue is exacerbated. A jigsaw may also produce a great deal of sawdust and chips, which may be an annoyance. This means that the surrounding environment could get unclean and untidy as a result. Lastly, a jigsaw does not permit you to alter the angle of the cut. Due to these issues, it is preferable to avoid using a jigsaw to cut porcelain tiles. 
- HAND SAW
A hand saw is comparable to a jigsaw, with the exception that it is built for cutting ceramics. A jigsaw has a spinning blade, while a hand saw has a straight blade. Hand saws are the simplest and cleanest method for cutting porcelain tiles. However, they lack the portability and strength of jigsaws. In addition, they are typically costly. This means that purchasing a hand saw will cost you several hundred dollars. A high-quality one, though, should survive for years. In addition, because hand saws have flat steel blades, they can cut more angles than a normal jigsaw. If you want something inexpensive and simple to operate, a hand saw is an excellent choice!
- LASER CUTTING DEVICE
A laser cutter is the final way for cutting porcelain tiles. These machines require a license to operate due to their enormous power. A laser cutter retains its shape while being heated and cut, unlike a jigsaw. It includes a built-in cooling system that keeps the machine working efficiently with minimal emissions. In conclusion, a laser cutter permits precision cutting. This makes it suitable for carving complicated designs into porcelain tiles. The disadvantage of laser cutters is that they are highly expensive. Typically, you should expect to pay between $1,000 and $3,000 for a basic model. The price increases based on characteristics such as the number of programmable colors and the size of the item.