the peel and stick kitchen backsplash becomes a commonly used cover in the kitchen these days. This cover works as a protective shield and a beautiful wallpaper. Peel and stick wallpaper offers an affordable, user - friendly alternative to traditional wallpaper. The self-adhesive backing requires no messy gluing, and if you make a mistake applying it, you can just peel it off and start over. However, installing temporary wallpaper is not as simple as tearing off the backing and sticking it to the wall. You will need to do some prep work to make sure it adheres properly to the wall. A few tools and tricks will also come in handy to help you achieve the smoothest surface possible. Follow these step - by - step peel and stick wallpaper instructions for long-lasting, bubble-free results. Before you begin, note that peel and stick wallpaper is generally best applied to smooth-textured walls and with eggshell, satin, or semi-gloss finishes. Check the wallpaper manufacturer's instructions to make sure the product adheres to your type of wall. To ensure you buy the right amount of removable wallpaper, carefully measure the space you plan to cover. Buy a little more wallpaper than you think you need to accommodate insects and tricky areas, such as windows, doors, or tight corners.
Supplies needed:
- sponge or cloth
- gentle cleanser
- tape measure
- rule
- pencil
- peel and stick wallpaper
- plastic smoothing tool
- utility knife
Follow these instructions to apply peel and stick wallpaper and quickly add color and pattern to your space. Step 1: Prepare the wall: Turn off to safely remove outlet covers and light switch panels in the area you plan to cover. Then, clean the wall by wiping it with a damp sponge or cloth and a mild, non-abrasive cleaner. Wait at least 24 hours for the surface to dry completely. Some temporary wallpapers also need to be suitable for the climate of the room, check the manufacturer's instructions. Step 2: Create a guide for your first room: Measure the width of the peel and stick wallpaper ($34, target), then use a pencil to transfer the measurements onto the wall. Use a ruler and spirit level to line up your marks from the ceiling to the baseboard (or whatever area you're covering). This guide will help you apply your first strip of wallpaper in a straight line. Step 3: Apply peel and stick wallpaper: Peel off about 12 inches of adhesive and align the wallpaper with the lines, starting at the highest point where you want to wallpaper. Working from top to bottom, press and smooth the wallpaper against the wall while peeling off the remaining backing. Using a downward stroke, run the plastic smoothing tool ($8, Home Depot) along the wall to remove any air bubbles. Once the entire piece is glued to the wall, use your ruler and a small utility knife to carefully cut along the baseboard and remove the excess. Step 4: Match the pattern and repeat When applying the following pieces, align the wallpaper pattern to ensure a seamless look. Slightly overlap the second piece with the first, then run the smoothing tool along the seam to make it as flat as possible. Trim the bottom as needed and repeat to cover the entire surface. Step 5: Work around Windows and Sockets: When you reach a window, door frame, or socket, let the wallpaper cover it. After application, use a ruler and utility knife to trim and remove excess. Then tape the paper to the wall around the outlet or window. Make sure the power to the outlet and distribution board is still off, and use a utility knife to carefully cut the paper in the opening. Don't worry about rough edges around the holes; the outlet cover or switch plate will hide most imperfections. You can also glue the paper flat for a seamless look. Step 6: Check for air bubbles: If there are still bubbles, use the tip of a utility knife or a pin to poke a small hole in the middle of the bubble. Then press to release trapped air and smooth the wallpaper.
peel and stick kitchen backsplash
there are different types of peel and stick kitchen backsplash. If the cost of tiles or installation difficulties prevents you from installing them in your home, consider peel and stick backsplash tiles. If you're interested in installing a tile backsplash in your home, but don't want to take on a large and expensive project, affordable, versatile, easy to install, and easy to remove peelable backsplash tiles are perfect. One of the main advantages of opting for a peel and stick backsplash over a traditional backsplash is the ease of installation. Installing traditional backsplash tiles can be a technically intensive and time-consuming project involving messy mortar and grout. The peel and stick backing saves you headaches. All you have to do is cut the tile to size (for some materials you only need a pair of household scissors), peel off the adhesive, and apply the ceramic tile to the surface of your choice. It's messy and carefree. Another advantage of using peel and stick backsplash tiles is cost – not only do you save on the cost of the tile itself, but you don't have to pay a professional to install it for you. The peel and stick backsplash is also very easy to remove. If your design preferences change frequently, you don't have to worry about costly, disruptive, or time-consuming removal processes. While some peel and stick backsplash tile materials may not have the authentic look and feel of traditional tile, many have the same premium texture and look as traditional tile materials. When installing peel and stick backsplashes, it is also important to recognize their temporary nature, especially in areas prone to moisture. Peel and stick adhesives wear out faster than mortar and grout over time, especially when they come in contact with water.
Kitchen backsplash ceramic tiles
- Natural Stone: Natural stone backsplash tiles come in a variety of organic materials and patterns, including slate and marble, with unique textures and beautiful colors with muted earth tones. Although thicker than other options, natural stone backsplash tiles are just as easy to install.
- Stone veneers: Made from engineered stone, a composite of crushed stone and adhesive, or natural stone veneer, which is lighter and easier to install than natural stone backsplashes.
- Vinyl and PVC: If you're new to tile, peel and stick vinyl and PVC backsplash tiles are inexpensive, waterproof, and easy-to-clean options. Vinyl and PVC may not have the authentic feel of other tile materials, but their low cost and ease of installation more than make up for it.
- Gel: Peel and stick gel tiles are flexible, soft to t, he touch and easy to install. Like vinyl and PVC tiles, it is easy to clean, but has the added benefit of having a more three-dimensional and realistic look than other types of synthetic tiles.
- Glass: Timeless and elegant, glass backsplash tiles can give any surface an elegant yet expensive look.
- Metal: With a strong, clean look, a metal backsplash can instantly transform any room in your home. Although a little is more expensive than other materials, self-adhesive metal tiles are durable and easy to clean.