The Following Is an Explanation of How to Apply Nikwax Waterproofing Wax to Shoes That Are Made of Leather: The use of Nikwax Waterproofing Wax on leather goods, such as leather shoes and gloves, confers hydrophobic properties on the leather, which not only causes it to be resistant to water, but also causes it to be coated in a protective layer that shields it from the effects of the environment. Be sure to read through our comprehensive review of the Nikwax Waterproofing Wax for Leather. Because leather is notorious for its propensity to readily take up water, it is essential that waterproofing agents be applied appropriately in order to get optimal results. In this tutorial, we will walk you through the process of applying Nikwax Waterproofing Wax for Leather, which can be broken down into four straightforward steps.
- Get the Product and the Leather Ready
Before starting the application process, there are a few things that you may want to take note of. The Nikwax Waterproofing Wax includes the following:
- It is compatible with all types of leather.
- May cause some types of leather to become darker.
- Does not include any potentially hazardous solvents
- Does not contain any organic chemicals that can evaporate
- Make sure your leather products are waterproof.
In Order to Prepare the Wax: The first thing you need to do is get the Nikwax Waterproofing Wax and the leather product you're going to be working with ready. Make sure to give the bottle a good shake before beginning the process of applying the Nikwax Waterproofing Wax, and before you do so, determine whether you will be applying the wax in liquid or cream form. Please be aware that the product is now offered in not one but two distinct iterations. Getting Your Leather Item Ready to Use: It is recommended that you remove the shoelaces before applying Nikwax Waterproofing Wax to leather shoes. Doing so will provide you with improved access to the tongue of the shoe as well as the areas that are located around the eyelets. When applying it to leather gloves, we suggest that you take off the Velcro cuffs first so that you have access to the full leather surface. 
This will allow you to work more efficiently. Unbuckle or remove anything else that might be in the way to gain access to any other leather things you have. It is essential to keep in mind that using Nikwax Waterproofing Wax on any type of sanded or buffed leather, including nubuck, will result in a finish that is polished and smooth.
- Keep the Leather Clean
After your leather goods have been properly prepared, you may move on to the next step of cleaning them. Make sure that you get rid of all the dust and grime that you can find, as it is possible that these things will hinder the waterproof coating and cause some sections to peel. To accomplish this, we suggest making use of a moist cloth, and for stains that are more difficult to remove, a horsehair brush is the most effective tool to use. It is important to keep in mind that you won't need to wait for your leather to dry before applying the Nikwax, as the product can be used on either dry or wet leather.
- Coat the leather in Nikwax and let it dry.
You will have a few alternatives available to you when it comes to applying the substance to your leather when the time comes. 
You can apply the Nikwax Waterproofing Wax by either using the sponge applicator, your fingers, or an external material like a cloth or wool. All three methods are effective. It is possible that using your fingers or a wool cloth will make it simpler for you to apply Nikwax Waterproofing Wax to leather boots and shoes, due to the many layers and areas around the eyelets. On the other hand, making use of the sponge applicator to apply it to gloves is a successful method. Simply refer to the options that are provided below for a comprehensive list. Option A: Using The Sponge Applicator The initial choice is to make use of the applicator that is included with the purchase of the product. Even though the waterproofing compound comes with a sponge applicator that is intended to uniformly disperse the formula onto your leather, you will still need to exercise some caution. The fact that the applicator is fastened to the top of the tube makes it very simple to apply the product. Simply giving it a shake and pressing on the tube should be enough to get the wax out. Now take the sponge, and working in a circular motion, apply the wax to the leather. Because it is possible for it to overlook certain locations, particularly those that are close to the seams, the sponge applicator is not necessarily the most effective technique to complete this task. 
If this occurs, you can either use a cloth or your fingertips to fill in the spaces. Continue doing this until the entire surface area of the leather is coated, and then wipe away any excess wax. Option B: Using Your Fingers to Perform the Action Utilizing your fingers is yet another option for applying the wax onto your leather surface. You may easily apply the wax to your leather with your fingers because it does not include any substances that could be damaging to your health. Simply give the tube a little shake before applying some of the product to your leather, and that's it! Now, using circular and back-and-forth motions with your fingertips, thoroughly cover the entire region with the coating that you just made. It is important to remember to remove any extra wax once you have applied sufficient wax to coat the entire piece evenly. Option C: Making Use Of Wool Or Cloth The last choice, which also happens to be our top pick, is to make use of a piece of cotton cloth or wool from a sheep. 
You just need to give the wax a good shake, then squeeze some of it onto the surface of your choice, and spread it evenly around your leather product. Because you will be able to reach all of the different spots, gaps, and seams that the sponge applicator may miss, this method is the one that we consider to be the most successful. This is due to the fact that you will not have to get your fingers dirty while using this method. Making use of a cloth or wool is another helpful method for spreading the wax out evenly over the entire area. Keep in mind that you need to coat evenly and remove any excess wax.
- Allow the Leather to Get Dry
After you have finished treating your leather with Nikwax and wiping away any excess, you will need to wait for it to dry completely. Because overly rapid drying can cause cracks and peels in leather, the manufacturer recommended that you allow your leather to dry in its natural state. The ideal method for drying your leather is to let it air dry naturally, preferably inside and over night. This should be done as soon as possible. It should not come into contact with direct sunlight, fires, heat, or fans. If you want the leather to have a glossy finish, you should buff it after it has had a chance to completely dry out. Your piece of leather is now resistant to water! It ought to be able to be easily removed by simply dripping off when it comes into contact with water! When the previous layer of Nikwax Waterproofing Wax has become less effective, you should immediately apply a fresh application of the product.