The features and properties of wire and cable, regardless of whether it is stranded or solid, are the key terms and decisive factors in choosing the right wire and cable.
stranded wire #12
The changes of these properties highly depend on the size of conductors.
The size 12 is one of the widely used wires for house wiring which we will explain the features that made it so popular for wiring.
Wire gauge is only a measure of the diameter or thickness of the wire, so 12 gauge wire is 2.05mm in diameter and has a lower resistance to current.
They are used in small kitchens, restrooms, outdoor outlets, including 120 volt air conditioners that can handle up to 20 amps of current.
The diameter of this wire gauge is approximately 2.05mm.
This wire must be manufactured to AWG standards.
In general, the thinner the thread, the greater the number of threads that can be joined together.
In situations where a large power source is required, 12 gauge wire is recommended for improved power transfer.
It is also important to note that quality has little to do with the size of the conductor (large or small).
But smaller gauges like 12-gauge cable can help you get more wires.
Wire resistance should typically be less than 5% of the total standard resistance of 12-gauge stranded wire.
Using 1000 feet of 12 gauge copper wire can drop up to 1.588 ohms. Since 12-gauge aluminum wire is stiffer and has 40% less conductivity, 12-gauge solid wire is recommended.
With the large front speakers you can use 12 gauge wire electrical and the rest of my speakers use 14 gauge wire.
For this, cleanliness and corrosion resistance are highly treated.
There are always questions about the use of 12 and 14 gauge wire, but it should be known that each wire gauge has its own specific purpose.
A larger wire is easier to handle more current without overheating because it has a larger cross-sectional area.
Larger gauge numbers correspond to smaller diameter threads, as the gauge is based on the amount of thread that can pass through a standard opening.
Since 12-gauge copper wire is typically 2.05 mm in diameter and 14-gauge copper wire is typically 1.63 mm in diameter, the former is preferred when overheating is prevented.
12 gauge wire specification
A 12-gauge wire rated up to 20 amps is typical.
This amperage capacity can transmit approximately 400 feet on 12 gauge insulated copper wire.
Then voltage loss becomes a problem and the voltmeter or voltage must be raised.
Remember that conduction of electricity creates heat along the length of the wire.
In other words, heat drains voltage, and the longer the wire, the more voltage you lose.
