Can you paint ceramic tile? Yes, and in this post, I'll tell you all you need to know about tile paint, including where to get it, how to apply it, and a lot more besides! This is a comprehensive tutorial and guide that will assist you in understanding the tile that has been painted. This project is both easy on the wallet and surprisingly long-lasting. Even in high-traffic areas, using this paint to refurbish tile floors and walls is a simple and cost-effective method to bring new life to the space. In all honesty, we have painted tiles on more than one occasion. It is an excellent tip for a makeover that is just temporary, for buying time before a remodel, or simply for updating old tile that you are not yet prepared to replace. Throughout this piece, you will see photographs of our foyer at the lake (which formerly featured a green tile from the 1990s) and then of our most recent primary bathroom renovation in St. Louis. I expect that the comprehensive tile paint guide we have worked so hard to compile for you will be the most detailed and extensive one available anywhere on the internet. Although hardwood floors are undoubtedly my top choice for flooring, my husband and I have quite a bit of tile between the two houses we own. When it comes to keeping up with the cleaning, I like to use this low-cost and all-natural grout cleanser. In fact, we've even done a grout refresh for a brand new and updated look! We bought a lake home that was full of charm several years ago, but it still had some characteristics from the 1990s, such as hunter-green tile. 
We have modernized the space over time by getting rid of the wallpaper and switching up the light fittings. The green tile in the doorway began to look more out of place and was really important to the layout of our open floor plan. It was also causing a contrast with our "white" walls and furnishings, which is when we realized that we needed to make a change, even if it was only a temporary one, until we could replace the flooring in this room. The concept that underpinned the painted tile in our primary bathroom was the same as the one described above. We have been saving up for more extensive remodeling, but in the meanwhile, we wanted to give the room a fresher, brighter appearance that we could enjoy in the meantime. 
Is it Possible to Paint Ceramic tiles? Yes! Ceramic tile paint can be used to paint floor tile as well as wall tile, provided a few easy steps and high-quality supplies are used. Floor tile and wall tile can both be painted. It is able to withstand a significant amount of wear and tear. Sand, clean, and prime the surface before applying high-quality ceramic tile paint to the floor. This will ensure that the paint adheres properly and will last for many years. The process of painting floor tiles is far simpler than either of us had anticipated. It was a short project, but there were a lot of downtimes because we had to wait for the primer and paint to dry and cure properly in between applications. Our entryway is rather tiny. 
Due to the fact that we enjoyed it so much, we decided to use this simple solution once more – check out the before and after pictures of the bathroom! You must choose an appropriate kind of paint. It would be best if you went with a superior quality product designed to work exclusively with ceramic tile. Benjamin Moore Satin Imperial Low Lustre Enamel is a fantastic product, in our opinion. Because enamel can withstand a lot of wear and tear and is resistant to stains, it is often used in locations that see a lot of foot traffic. Because it doesn't hold up well to scuffs and scratches, latex paint is not a good choice for this job. Instructions for Painting Tile: If necessary, you can protect the surfaces around the tile with tape by wrapping it around it. Sand the surface by hand with sandpaper that has a medium grit and a sanding block, or, if at all possible, use an electric sander to create a surface that is suitable for the primer to cling to. A stripper should be used to clean the tile thoroughly. After giving it a thorough cleaning (in an ideal situation, you should make use of an after-wash product, as was mentioned in the section on supplies above), let it air dry. 
The tile should be primed, then allowed to dry. If necessary, apply a second layer of paint. Apply the paint with the roller, beginning in the areas of your space that are the furthest away from the door and working your way back to it as you leave. Sand very gently in between coats of paint to ensure that the paint will adhere well if you decide to apply a second coat. Extra Credit: If you want to take this project one step further, you can seal it with a layer of polyurethane sealer, which will get you extra credit. However, if you are working in a location that has a lot of moisture, you might want to consider doing this, but so far, we haven't found that we require it! 
Advice on Painting Tiles A little amount of caulking should be applied to any tile cracks that need to be mended before painting, and then the cracks should be smoothed out using your fingertips. Repairs to grout are handled in the same manner. Make sure that any broken grouting has been repaired or replaced before applying the tile paint, as this will prevent the paint from showing through. Sanding is a step that should not be skipped because of its significance. It helps buff any shine off of the tile, leaving you with a surface that is better equipped to receive the primer and paint. Tile paint is the only kind that should be used for this project! The traditional latex paint will not last for an extended period of time. The Benjamin Moore product we utilized is pre-combined in black and white. On the other hand, you can have it colored to match any of the other cards in their deck or a color of your choosing! We decided to go with Decorator's White because it's a shade that I've had my eye on for a while now.
💰 Tenfold your income 💎