Buy all kinds of door frame parts names+price
You may have realized that there are many names for the parts of a door and its frame. Read the article below.
door frame parts names
containing almost all those names and brief descriptions if you need to substitute an old door or are considering purchasing a new one to give your home a new appearance.
- a door jamb
The inside sides of the doorframe are known as door jambs. Door jambs are also often referred to as the "legs" since the term "jamb" is derived from the French word jambe, meaning "leg."
The area of the door framework above the door, or the "top jamb," is one area of misunderstanding.
On either side of a door, there are two jambs: one holds the mounting hinges, and the other houses the striking plate for the latch.
The only components that may be referred to as jambs are the two pieces that make up the sides of the doorframe.
- Header or Headings
The top portion of the door, which is sometimes incorrectly referred to as the "top jamb," is really referred to as the "head" or the "header."
Because it is a component of the door frame, it performs a similar function as the jambs. However, it shouldn't be referred to as a jamb since it is on the top and not the side.
- Doorframe versus Case
The header, the two jambs, and together make up the doorframe. When installing a door, this portion of the door is secured into the rough opening. The term "casing" is another that may be used to describe the doorframe.
- Bruised Opening
The rough opening is the hole in the wall where the doorframe normally hangs. Shims, which are little pieces of wood jammed between the rough opening's sides and the doorframe to keep it in place, are used to attach the doorframe to the opening.
- Doorstop
The doorstop is a piece of wood that is attached to the doorframe to prevent the door from opening farther than it already has. Without a doorstop, the door would swing through the framework as you closed it, harming the hinges.
door frame parts diagram
There are occasions when door jambs are constructed with elevated sections that serve the same function, eliminating the requirement for a doorstop. Jambs that have been rebutted are these.
- Door Trim
The ornamental portion that is affixed above the door framework to conceal the area where the header and jambs meet the raw aperture is called the door trim.
Caulking may sometimes be used to secure trim to the wall, although this is not always the case, particularly for interior doors.
- Hinge
The portion of the door that swings on the hinge. Typically, a door has three or four hinges. The hinge is attached to the door frame on one side and the door itself on the other.
- Hook Pin
To secure the door, a metal pin called a hinge pin is put into the hinge. The hinge pins must be taken out in order to take a door off its hinges. After that, you can just lift it off.
- Limitation or Silence
The bottom portion of the door right below the header is referred to as the threshold or sill.
- Stile
The stiles are the door's actual side panels. The "hinge stile" is the stile on the side where the hinge is, and the "lock stile" is the stile on the other side. The door panels are framed by the stiles.
- Panels
The components that make up the majority of the door's surface area are called panels. Doors come in a variety of sizes and forms, and depending on the style, some may have only one panel and others may have numerous.
- High Rail
At the top of the door, the top rail serves the same purpose as the stiles. The panels below it, serve as the top frame.
door frame parts
- Lower Rail
Similar to the top rail, the bottom rail is also at the bottom of the door. The bottom rail contains the panels that compose the primary surface of the door, together with the top rail and the two stiles.
- Secure Rail
Not all doors have a lock rail, but if they do, it is positioned in the middle of the door and resembles the top and bottom rails.
Your door will often have one or even more panels above and below it if it has a lock rail.
- Mullions
The lock rail is intersected by mullions that split the door vertically along the center if it is divided into four pieces, each of which has one panel.
A typical arrangement has a panel on each side of a mullion that runs from the top rail to the top of the lock rail. The bottom of the lock rail is followed by a second mullion that has panels on each side and goes all the way to the bottom rail.
The upper mullion of a door like this, which is split into four portions, is referred to as the "first mullion," and the bottom mullion as the "second mullion."
- Door Handle or Knob
The component that is utilized to open the door is the doorknob or door handle. You spin a circular doorknob to open the door. To open a door that has a handle, you must push it downward.
- Lockset
This refers to the whole locking system.
- Latch
The component that keeps the door shut is the latch. The mechanism enables the latch to be dragged into the door, enabling the door to open when you rotate the doorknob or depress the handle.
- Hammer Plate
A metal plate called the strike plate is attached to the lock jamb where the latch resides. When the door shuts, the latch strikes the strike plate.
door frame parts crossword clue
- Deadbolt
Some doors' locking mechanisms include the deadbolt. Anyone attempting to enter the door is prevented from doing so when the key is turned, pushing the bolt into the mortice.
- Mortice
The hole where the deadbolt enters when the door is locked is known by this term technically.
- Keyhole
You insert the key into the keyhole to lock or unlock the door.
- Weather-stripping
To create an airtight seal, weather-stripping is wrapped around the door jambs and header. As a result, drafts are avoided, and energy efficiency is increased since heat is not lost via the opening.
- Transom
An ornamental component installed above a door is called a transom. It could have glass in it, in which case the term "transom window" would apply.
- Sidelight
An adjacent door's sidelights are two small windows. They often only have outside doors.
- Tracks or Rails
A sliding door travels along runners, commonly referred to as rails or tracks.
- Hangers
At the top of the sliding doors, there are hangers. They serve as the anchors that keep the door in place.
- Rollers
Sliding doors with hangers on them slide along the rails or tracks at the bottom thanks to rollers that are fastened to the hangers.
How useful is this article to you?
Average Score
5
/
Number of votes:
1
