steel sheets and black steel sheets are used in decorations and laminated leather is applied to them easily. This part is installed in the upper part and attracts attention there. Given that the forged steel floor is very strong and can carry a lot of weight, it can be used in places with heavy equipment or high traffic. The structure of HPL-coated false steel floors is filled with steel. False steel floors are made in two layers, where the space between the two layers is filled with a mixture whose main material is a special lightweight concrete. In this way, the resistance of the false floor construction can be maximized. The steel tile measures 60 x 60 cm according to the standard. This size is mostly used for false floors. Each tile weighs about 15 kg. The production of each tile uses about 5 kg of steel. Steel tiles can hold up to 2300 kg, making them ideal for places with heavier equipment. This product has two pieces, the top, and the bottom piece, the thickness of the top piece is 0.6 mm, the thickness of the bottom piece is 0.7 mm and the thickness of the tile is 34 mm. The material of the bottom plate is ST14 and the material of the top plate is ST12. For additional protection of the panels, an electrostatic powder coating was used on both sides of the panels. This type of coating increases resistance and service life and also prevents condition changes in all weather conditions. The cover installed on the tile is HPL. One of the features that this product provides for false floors is moisture and heat insulation. In addition, the product has good resistance to current and weak acids. This tile is made of ABS and is very resistant to pressure, heat, and cold.
black steel sheet laminate
laminating and covering black steel sheets and steel products are very common and coloring them is used in order to cover from oxidation. Linear paint coating processes include cold rolling and coil coating. The paint coating line is continuous by opening the coil for coating and mechanically connecting the plate strip to the end of the previous coil. Due to continuous operation, the line consists of two tape collecting units (slides) that supply the tapes to the coating in the process web. In the pre-chemical treatment section, the surface of the tape is cleaned and the coating is applied to the tape in four steps. The coating improves the corrosion resistance of the product and the surface tension of the kit. The line includes two coaters, the first adding filler material on both sides of the strip and the second adding top and bottom coatings to the strip. There is a heater behind the coating device and the thickness of the colored coating is cured by the hot air. In the next section of the strip, the colored plates are extinguished in water. If the laminate is used as the top coat, the last coater adds the glue from the oven to the surface of the sheet. As soon as it comes out of the oven, the laminated lid is pressed into a roll, and protective tape can also be applied to the lid to protect the lid from damage and soiling during subsequent processes (product delivery). Before winding, the surface of the sheet was inspected visually.
black steel sheet leather
sometimes designers use leather on top of steel sheets and black steel products to make them more likable. We can see this more on the doors and beds. Most people like warm styles. Choosing a leather upholstery for a room door is a smart choice and a great key to adding that touch to your interior. A smart selection of leather door covers can complement your interior perfectly. The entrance to the management room can be the foundation of personality health. You can really convey this feeling with stamped leather doors that are harmonious and stylish with your interior. You can also enhance the interior view by implementing wall acoustics for a part of your home. Because iron doors and aluminum doors do not have the ability to touch and add MDF boards, we will introduce them in detail below. To enhance the decor of your home or workplace, you can touch the leather doors. Touch or rivets make a big difference to your decor. This technique is also used for sofa embroidery and wall decoration. The fabric cover does not hold the rivets.
The fabric cover on the door loses its quality in the shortest possible time. The fabric is not washable or waterproof, but leather cases are not like that. It is both waterproof and washable, has a very long shelf life in relation to fabric, and has a good nail-holding ability. The size of the leather used in a leather door has the biggest impact on your cost. The handle of a leather door has a great influence on its aesthetics. Usually, the person ordering the door buys the door handle himself and then gives the job to the owner. But you can also leave the job to a master craftsman to prepare and assemble the best and most stylish handles for your leather doors.
black steel sheet lead
Lead plate is a sheet rolled with a metallic lead-like black steel products. It has strong corrosion resistance, and acid and alkali resistance, and is also a relatively inexpensive protective material in many aspects such as acid-resistant environment, medical radiation protection, X-ray, CT room radiation protection, resonance, and sound insulation. It is radiation safe. It has strong anti-corrosion, acid and alkali resistance, acid-proof environmental construction, medical radiation protection, X-ray, CT room radiation protection, resonance, sound insulation, etc. It is a relatively inexpensive radiation protection material. Used mainly for the production of lead-acid batteries. It is used for coating protection of lead-acid and lead pipes in acid production, metallurgy, and other industries. In the electrical industry, lead is used as cable covers and fuses. Lead-tin alloys containing tin and antimony are used for printing moving types, and lead-tin alloys are used to make fusible lead electrodes and lead sheets and lead-coated steel sheets in the construction industry. Lead absorbs X-rays and gamma rays well and is widely used as a shielding material for X-ray machines and nuclear energy apparatus. In some regions, lead has been or is being replaced by other materials due to lead poisoning and economic reasons. Lead is an intermediate chemical element in the periodic table with the chemical symbol Pb. Lead also belongs to the metal category. This metal does not pass-through nuclear radiation. Lead occurs in nature as a mineral called galena (cubic crystalline system). Lead is a chemical element in the periodic table with the symbol Pb and atomic number 82. Lead is a heavy, toxic, and malleable element with a dark gray color. It is bluish-white when freshly shaved but turns dark gray when exposed to air.
black steel sheet nylon
some sheets like black steel sheets are used to produce pipes as well. Some of these pipes have a nylon cover to make them waterproof. Plastic mold steel is one of the most widely used steels for making molds for plastic products. Today, plastic, despite its many harmful effects on the environment, unfortunately finds a special place in our human applications. In the manufacture of plastic molds, the type of steel and the selection of alloying elements have a certain influence on the life, performance and cost of the mold. The cost and cost of producing plastic molds depends indirectly on the steel. If the alloy steel is not selected, additional costs will be incurred. imposed on the template. The functions of parts which are effective for the manufacture of plastic molds and the choice of similar alloy steel are:
- surface smoothness
- green curry
- Corrosive or abrasive properties of the workpiece material
- Dimensional accuracy
- Production and circulation
- Construction time
Classification of plastic mold steel
Steel for plastic molds is divided into four categories according to toughness (type of heat treatment):
- hardened
- annealing
- age hardening
- Hardened steel: (hardened)
These steels are put on the market in hardened and baked form, and the role of the necessary molds can be implemented and developeddirectly on them. One of the main advantages of these steels is the shortening of the manufacturing process and the absence of small cracks due to heat treatment. These steels also have disadvantages, such as: due to their hardness, these steels take longer to process than annealed steels. As the hardness of such steels gradually decreases from the surface to the depth, the hardness of molds made with such steels is not uniform. In addition, they are not suitable for very abrasive resins or very high process temperatures.
0
0