Here you are going to learn about the formula that there is in the stones tiles is called artificial and also the lines of production for this commodity. One type of prescription for rostone and one type of preparation technology are distinguished from one another by the fact that the prescription of the present invention consists of the following ingredients in the following percentages by weight: according to weight percent cement 20-25 percent, gypsum 5-10 percent, silicon ash 10-15 percent, Quilonum Retard 0.1-0.5 percent, extraordinary water reducer 1-3 percent, water-resisting agent 1-2 percent, pigment 5-10 percent, and sand 40-55 percent Process for the preparation of the present invention: (a) go into mould: once the aforementioned raw materials have been consistently mixed in the aforementioned ratio, the water that adds 15-20 percent is stirred one more time, and the mixture is poured in the mould; by shaking the mixture, bubbles are created from the mixture.
(b) demolding: once the mixture has been placed for one to four hours, the forming mixture, followed by the forming mixture and the mold separating; (c) maintenance: the forming mixture was maintained for one to three days at a temperature of twenty-five to twenty-nine degrees Celsius and a relative humidity of ninety-five to ninety-five percent; (d) polishing cutting: choose from a variety of abrasive discs in order to polish the sheet material; after the polishing sheet material has been cleaned promptly and cut, proceed to produce excisions in the sheet material; (e) aftertreatment: the material from the excision forming sheet is cleaned up, surface waterproofing is performed, the product is allowed to cure naturally at room temperature, and then it is packed. C04B28/14 Compositions of mortars, concrete or artificial stone, containing inorganic binders or the reaction product of an inorganic and an organic binder, e.g. polycarboxylate cement containing calcium sulfate cement.
A kind of prescription of and preparation technology Technical field: The present invention relates to a kind of finishing material, belong to decorating, and uses artificial stone-like material's technical field, be specifically related to a kind of preparation. Background technology: As everyone knows, lithotome is not only exploited difficulty, and resource is very limited, but also has certain radiation phenomenon simultaneously, and aberration is also very big. Its main material product can be divided into two big classes in the market: the first kind and main material add resin polymerization with sandstone ceramic or powder or water-ground limestone, and the shortcoming of this series of products that is: the indoor environment and human body are caused by certain harm. Discarded back is to water quality, and soil all will cause certain pollution; Second class is mainly used in the production of sheet material, and its product must high-temperature sintering molding in the kiln, and its major defect is that camber stone material and molding series products all cannot be processed.
Artificial stones
In today's world, the stones called artificial are totally resistant to pressure, light, ultraviolet radiation, and other environmental stresses. In addition, they are items that have minimum maintenance requirements, and they can be worn after installation while still behaving exactly like natural stone. Other characteristics of these stones include the fact that they are single-layered, that they are compressed and vibrated in a vacuum environment, and that their composition includes a high percentage of interconnected grains derived from the composition of natural stone aggregates. These are just some of the characteristics that can be mentioned. Artificial stone product line, by using maximum organic elements and combining modern chemical additives, enables us to produce products according to the order and characteristics preferred by the consumer, in the same way that they have the power to decorate any interior or exterior place of the building. Artificial stones produced today are completely resistant to pressure, light, and ultraviolet rays.
We are able to complete the task in the shortest amount of time and at the lowest possible cost, in addition to having the advantage of preserving the natural splendor of the materials. The extremely varied and natural structures, colors, and patterns of these goods are interesting and interesting from the perspective of architects, interior designers, and building contractors. It has eliminated any need for external chemicals to preserve them, and another aspect of these stones is the ease with which they may be installed and used. The manufacturing process used for these items, in conjunction with the utilization of cement of an exceptionally high caliber, makes it possible to guarantee a service life of up to thirty years for the products. Additionally, artificial building stones have additional features that include the ability to resist freezing and thawing, soundproofing, being fireproof, and absorbing energy. One last piece of technological knowledge that might be discussed is the thickness of these stones. The size of these stones ranges from three quarters to one inch. As a result, the maximum thickness that can be cut into these stones is 2 24 inches, their average thickness is often not 5 44 to 5 44, and they can be molded to any thickness that is needed. In a similar fashion, the weight of these items ranges between 8 and 10 pounds per square foot, and the color of natural stones is provided by colors derived from iron oxide. The following are some definitions that can be applied to artificial stones, depending on the nature of the components that make up the stone in each composition: Marble stones are stones that contain marble in addition to other types of limestone. Granite stones are composed of a variety of different silicate minerals, including quartz, quartzite, silica, granite, and prophyry, amongst others. There are a variety of other kinds of stone that can be utilized as well, such as slate, dolomite, serpentine, and so on. The look that you want the project to have in the end will determine the stone materials you use.
Artificial stones production lines
The raw materials that are used in the manufacturing lines for production of the stones called artificial are chosen in such a way that they are suitable for use in both the interior and outside of the building, both on the floor and on the facade. This makes the artificial stones perfect for use in both applications. The use of natural stone materials in its composition, such as marbles, calcite stones, granites, and silica stones, along with cement and a small amount of water, gives the stone properties that have 75 percent of the quality of natural stone properties. This is made possible by the combined technology of the Vibra Press and the use of natural stone materials in its composition. Yes, the items that are considered standard are those that are finished with manufacture, have had their parameters finalized, have had their thickness calibrated, and have had their edges tooled. These are the products that are ready to be installed. The meaning of the term "production" The making of anything is a procedure. It is possible to define production as the process of changing production inputs into finished goods and services that are required for consumption or investment. This definition is applicable on a broad scale. To put it another way, production is the process by which certain commodities, known as production factors (Factors) or inputs (Inputs), are transformed into other goods, known as products (Products) or outputs (Outputs) (Outputs). To put it another way, production can be defined as any action that provides usefulness in either the present or the future. As a result, the term "production" refers to the process by which inputs such as minerals, polymer materials, chemicals, and capital are transformed into outputs such as ancient stone, flooring and mosaic tile, stepping stone, table, glue, sink, and cabinet stone. The meaning of the term "production line" The collection of machines and tools that facilitates the transformation of inputs (basic materials) into products is referred to as a manufacturing facility. The manufacture of artificial stone can be profitable. As a result of the extremely high variety in the production of all different kinds of artificial stones, such as facing stones and floor stones, stairs, cornices, inscriptions, stone panels, dining tables, fountains, and so on, as well as the capability to produce in a variety of colors (about 1600 different colors), it is possible to say that it will meet the needs of the majority of customers, and as a result, it is possible to meet 90 percent of the market's requirements with this production line. On the other hand, the cost of these kinds of finished items is significantly less than that of real stones due to the fact that works such It does not include the costs of extraction, processing, or transportation; however, in terms of quality, it has more favorable conditions than natural stones; consequently, it is economically more economical than natural stones, and the market share for this product is growing significantly every year. The following phone number can be used to speak with someone about setting up an artificial stone production line and producing artificial stone.
0
0